On Tue, 23 Mar 2021 18:01:27 +0100, Stefan Sperling <s...@stsp.name> wrote: > This switches athn(4) to the new RA Tx rate adaptation module. > Tests on athn(4) PCI devices are welcome. > USB devices don't need to be tested in this case Tx rate adaptation > is taken care of by firmware. > > I could only test on AR9285 so far, but the result looks promising.
This seems to be working well on my apu2 in hostap mode: athn0 at pci4 dev 0 function 0 "Atheros AR9281" rev 0x01: apic 5 int 16 athn0: AR9280 rev 2 (2T2R), ROM rev 22, address 04:f0:21:xx:xx:xx However, my laptop with AR9287 was noticeably worse with this diff (dropped pings, stuttering keystrokes in interactive ssh session, estimated 20 minutes to scp(1) a 20M file...). The combination of apu2 with diff and my laptop sans diff is giving me good results though :) athn0 at pci2 dev 0 function 0 "Atheros AR9287" rev 0x01: apic 2 int 17 athn0: AR9287 rev 2 (2T2R), ROM rev 4, address 74:de:2b:xx:xx:xx On this laptop, I use a trunk(4) interface and I connect to the apu2 via authpf(8). Some configs and dmesg below. Let me know how I can be of further assistance. $ cat /etc/hostname.athn0 join myap wpakey xxx powersave up $ cat /etc/hostname.em0 up $ cat /etc/hostname.trunk0 trunkproto failover trunkport em0 trunkport athn0 dhcp up $ ifconfig athn0 athn0: flags=8943<UP,BROADCAST,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 lladdr d4:be:d9:xx:xx:xx index 2 priority 4 llprio 3 trunk: trunkdev trunk0 groups: wlan media: IEEE802.11 autoselect (HT-MCS2 mode 11n) status: active ieee80211: join myap chan 7 bssid xx:xx:xx:xx:xx:xx -36dBm wpakey wpaprotos wpa2 wpaakms psk wpaciphers ccmp wpagroupcipher ccmp powersave on (100ms sleep) OpenBSD 6.9-beta (GENERIC.MP) #437: Tue Mar 30 14:45:23 MDT 2021 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 17064501248 (16273MB) avail mem = 16531947520 (15766MB) random: good seed from bootblocks mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xebf20 (98 entries) bios0: vendor Dell Inc. version "A13" date 06/20/2014 bios0: Dell Inc. Latitude E6430s acpi0 at bios0: ACPI 5.0 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC FPDT MCFG HPET SSDT SSDT SSDT DMAR ASF! SLIC BGRT acpi0: wakeup devices P0P1(S4) USB1(S3) USB2(S3) USB3(S3) USB5(S3) USB6(S3) USB7(S3) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP05(S4) PXSX(S4) RP06(S4) PXSX(S4) RP07(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2592.04 MHz, 06-3a-09 cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE cpu1 at mainbus0: apid 2 (application processor) cpu1: Intel(R) Core(TM) i5-3320M CPU @ 2.60GHz, 2591.60 MHz, 06-3a-09 cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins acpimcfg0 at acpi0 acpimcfg0: addr 0xf8000000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P1) acpiprt2 at acpi0: bus 1 (RP01) acpiprt3 at acpi0: bus 2 (RP02) acpiprt4 at acpi0: bus -1 (RP05) acpiprt5 at acpi0: bus 11 (RP06) acpiprt6 at acpi0: bus -1 (RP07) acpiprt7 at acpi0: bus -1 (RP08) acpiprt8 at acpi0: bus -1 (PEG0) acpiprt9 at acpi0: bus -1 (PEG1) acpiprt10 at acpi0: bus -1 (PEG2) acpiprt11 at acpi0: bus -1 (PEG3) acpiprt12 at acpi0: bus 3 (RP03) acpiprt13 at acpi0: bus 7 (RP04) acpiec0 at acpi0 acpipci0 at acpi0 PCI0: 0x00000004 0x00000011 0x00000001 acpicmos0 at acpi0 "SMO8810" at acpi0 not configured "*pnp0c14" at acpi0 not configured acpibtn0 at acpi0: LID0 acpibtn1 at acpi0: PBTN acpibtn2 at acpi0: SBTN acpiac0 at acpi0: AC unit offline acpibat0 at acpi0: BAT0 model "DELL YJNKK18" serial 1 type LION oem "DP-SDI56" acpibat1 at acpi0: BAT1 not present acpibat2 at acpi0: BAT2 not present "DELLABCE" at acpi0 not configured acpicpu0 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpicpu1 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10), C1(1000@1 mwait.1), PSS acpitz0 at acpi0: critical temperature is 107 degC acpivideo0 at acpi0: VID_ acpivout0 at acpivideo0: LCD_ cpu0: using VERW MDS workaround (except on vmm entry) cpu0: Enhanced SpeedStep 2592 MHz: speeds: 2601, 2600, 2500, 2400, 2300, 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09 inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09 drm0 at inteldrm0 inteldrm0: msi, IVYBRIDGE, gen 7 xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi, xHCI 1.0 usb0 at xhci0: USB revision 3.0 uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1 "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address d4:be:d9:xx:xx:xx ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16 usb1 at ehci0: USB revision 2.0 uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi azalia0: codecs: IDT/0x76df, Intel/0x2806, using IDT/0x76df audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi pci1 at ppb0 bus 1 ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi pci2 at ppb1 bus 2 athn0 at pci2 dev 0 function 0 "Atheros AR9287" rev 0x01: apic 2 int 17 athn0: AR9287 rev 2 (2T2R), ROM rev 4, address 74:de:2b:xx:xx:xx ppb2 at pci0 dev 28 function 2 "Intel 7 Series PCIE" rev 0xc4: msi pci3 at ppb2 bus 3 ppb3 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi pci4 at ppb3 bus 7 ppb4 at pci0 dev 28 function 5 "Intel 7 Series PCIE" rev 0xc4: msi pci5 at ppb4 bus 11 sdhc0 at pci5 dev 0 function 0 vendor "O2 Micro", unknown product 0x8221 rev 0x05: apic 2 int 17 sdhc0: SDHC 2.0, 50 MHz base clock sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 21 usb2 at ehci1: USB revision 2.0 uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 pcib0 at pci0 dev 31 function 0 "Intel QM77 LPC" rev 0x04 ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI 1.3 ahci0: port 0: 6.0Gb/s ahci0: port 1: 1.5Gb/s scsibus1 at ahci0: 32 targets sd0 at scsibus1 targ 0 lun 0: <ATA, CLOVER CN-M750M, 2BA3> naa.0000000000000000 sd0: 715404MB, 512 bytes/sector, 1465149168 sectors cd0 at scsibus1 targ 1 lun 0: <MATSHITA, DVD+-RW UJ8B2, 1.01> removable ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2 int 18 iic0 at ichiic0 iic0: addr 0x29 07=ff 0f=33 10=8c 11=33 12=10 13=65 14=a5 15=21 16=1a 17=1b 18=1d 19=a0 1a=60 1b=74 1c=c0 1e=20 20=7f 22=40 27=ff 29=fb 2b=0f 2d=3f 2f=20 30=95 31=29 32=0e 33=16 87=ff 8f=33 90=8c 91=33 92=10 93=65 94=a5 95=21 96=1a 97=1b 98=1d 99=a0 9a=60 9b=74 9c=c0 9e=20 a0=7f a2=40 a7=ff a9=fc ab=0d ad=40 af=20 b0=95 b1=29 b2=0e b3=16 words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=ffff spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-10600 SO-DIMM spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-10600 SO-DIMM isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 irq 1 irq 12 pckbd0 at pckbc0 (kbd slot) wskbd0 at pckbd0: console keyboard pms0 at pckbc0 (aux slot) wsmouse0 at pms0 mux 0 pcppi0 at isa0 port 0x61 spkr0 at pcppi0 vmm0 at mainbus0: VMX/EPT uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2 vscsi0 at root scsibus2 at vscsi0: 256 targets softraid0 at root scsibus3 at softraid0: 256 targets sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> sd1: 715402MB, 512 bytes/sector, 1465143473 sectors root on sd1a (69636c59313db511.a) swap on sd1b dump on sd1b inteldrm0: 1366x768, 32bpp wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0 wsdisplay0: screen 1-5 added (std, vt100 emulation)