Stefan Sperling <s...@stsp.name> writes:
> Here is another attempt at adding Tx aggregation to iwx(4). > This patch is based on the latest state in CVS (if_iwx.c r1.107, which > I have committed a minute ago). Sync your tree before applying this patch. > > Compared to previous iterations of this patch, I have fixed bugs which > caused fatal firmware errors and which made traffic stall after roaming. > > This patch could still make 7.0 release if it gets sufficient test coverage. > Please run with this and report any regressions. Thanks! > > So far, tested by me on AX200 and AX201 against a Pepwave 11ac AP. > I have so far not seen any fatal firmware errors, and roaming between 2GHz > and 5GHz channels offered by the same AP seems to work reliably. > Throughput goes up to 100 Mbit/s max. Looking good so far on my new iwx pcie device. Am able to get 50/25 Mbit/s up/down via speedtest-cli. Improvement over my previous speeds from where this device is located. Box it came in said it's a "Ubit WIE7265 AX200NGW T2", dmesg reports: iwx0 at pci13 dev 0 function 0 "Intel Wi-Fi 6 AX200" rev 0x1a, msix iwx0: hw rev 0x340, fw ver 63.c04f3485.0, address b0:7d:64:86:b7:80 Will try on my X13 later tonight or this weekend. The above device is in a stationary machine, so I can't test moving the house around with it. -dv
