On Thu, Mar 10, 2022 at 01:56:19PM -0500, Dave Voutila wrote:
> 
> Stefan Sperling <[email protected]> writes:
> 
> > On Thu, Mar 10, 2022 at 12:25:17PM +0100, Stefan Sperling wrote:
> >> Unless anyone else finds a problem, this patch can be considered ready
> >> for review and commit.
> >
> > Of course, I forgot to apply my sysassert fix to the second phy context
> > command function...  Fixed here.
> >
> 
> Looking good on the 3 devices I've tested, with one minor nit. All 3
> devices are similar AX200s like so:
> 
> iwx0 at pci3 dev 0 function 0 "Intel Wi-Fi 6 AX200" rev 0x1a, msix
> iwx0: hw rev 0x340, fw ver 67.8f59b80b.0, address ...
> 
> For some reason, on my lenovo x13 I had to manually enable 11ac mode via
> ifconfig. No idea why. It was sitting on the table next to my Go 2 that
> automatically picked up on 11ac mode.

Which channel was it on while not in 11ac mode?
Only the 5GHz channel range (chan 36+) can use 11ac.

In the 2GHz channel range (chan 1-12 for the US) 11ac cannot be used.
In that range it should autoselect mode 11n, or 11g/11b for very old APs.

We could tweak access point selection heuristics to prefer 11ac over 11n
if both are available for a given SSID. But that can be done in a later
patch.

> In all 3 cases I tested with tpcbench between my apu2 gateway connected
> to my Synology RT2600ac and the client machine. In all 3 cases I saw
> close to a 100% increase in average bandwidth reported. :-)

Very nice. Thanks for testing!

Reply via email to