Hi,
I recently got a Gembird EG-PMS2 power strip controllable over USB.
It currently attaches over uhidev which is problematic since it lacks an
interrupt endpoint causing uhidev to punt early during attachment.
Instead, letting it attach as ugen makes it possible to control the
device using third-party software like sispmctl.
Here's a diff adding a quirk, excluding the usbdevs regen bits.
Comments? OK?
diff --git sys/dev/usb/usb_quirks.c sys/dev/usb/usb_quirks.c
index be65ad08602..a85ea0cd510 100644
--- sys/dev/usb/usb_quirks.c
+++ sys/dev/usb/usb_quirks.c
@@ -126,6 +126,7 @@ const struct usbd_quirk_entry {
{ USB_VENDOR_CYPRESS, USB_PRODUCT_CYPRESS_SISPM_OLD, ANY, { UQ_BAD_HID }},
{ USB_VENDOR_CYPRESS, USB_PRODUCT_CYPRESS_SISPM, ANY, { UQ_BAD_HID }},
{ USB_VENDOR_CYPRESS, USB_PRODUCT_CYPRESS_SISPM_FLASH, ANY, {
UQ_BAD_HID }},
+ { USB_VENDOR_CYPRESS, USB_PRODUCT_CYPRESS_GEMBIRD_EG_PMS2, ANY, {
UQ_BAD_HID }},
{ USB_VENDOR_MICROCHIP, USB_PRODUCT_MICROCHIP_USBLCD20X2, ANY, {
UQ_BAD_HID }},
{ USB_VENDOR_MICROCHIP, USB_PRODUCT_MICROCHIP_USBLCD256X64, ANY, {
UQ_BAD_HID }},
{ USB_VENDOR_MECANIQUE, USB_PRODUCT_MECANIQUE_WISPY, ANY, { UQ_BAD_HID }},
diff --git sys/dev/usb/usbdevs sys/dev/usb/usbdevs
index 1091754f576..6cbf022bba4 100644
--- sys/dev/usb/usbdevs
+++ sys/dev/usb/usbdevs
@@ -1508,6 +1508,7 @@ product CYPRESS LPRDK 0xe001 CY4636 LP RDK
Bridge
product CYPRESS SISPM_OLD 0xfd10 Sispm - old version
product CYPRESS SISPM 0xfd11 Sispm
product CYPRESS SISPM_FLASH 0xfd12 Sispm - flash
+product CYPRESS GEMBIRD_EG_PMS2 0xfd15 Gembird EG-PMS2
/* Daisy Technology products */
product DAISY DMC 0x6901 PhotoClip
