Ah of course. I will move the missing files into base. Brian Conway <bcon...@rcesoftware.com> wrote:
> Just a heads up, I was trying a few install variations of -current and > noticed sshd reorder failing on boot on one of them. Unpacking > /usr/share/relink/usr/sbin/sshd/sshd.tar and running `make -f Makefile.relink > relink` by hand yielded: > > ld: error: cannot open crt0.o: No such file or directory > cc: error: linker command failed with exit code 1 (use -v to see invocation) > > Sure enough, that particular install had base72 but not comp72. > > # tar ztf comp72.tgz|grep crt0.o > ./usr/lib/crt0.o > ./usr/lib/gcrt0.o > ./usr/lib/rcrt0.o > > Not sure if this is worth being picky over, as non-compiler installs are > rare/not recommended, but I wanted to make a mention just in case. Thanks. > > dmesg (amd64 VMM): > > OpenBSD 7.2-current (GENERIC) #949: Thu Jan 26 09:54:34 MST 2023 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC > real mem = 1593823232 (1519MB) > avail mem = 1526300672 (1455MB) > random: good seed from bootblocks > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf36e0 (10 entries) > bios0: vendor SeaBIOS version "1.14.0p0-OpenBSD-vmm" date 01/01/2011 > bios0: OpenBSD VMM > acpi at bios0 not configured > cpu0 at mainbus0: (uniprocessor) > cpu0: Intel(R) Core(TM) i5-8259U CPU @ 2.30GHz, 2304.01 MHz, 06-8e-0a > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,CX8,SEP,PGE,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,PCLMUL,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,RDRAND,HV,NXE,PAGE1GB,LONG,LAHF,ABM,3DNOWP,ITSC,FSGSBASE,BMI1,AVX2,SMEP,BMI2,ERMS,RDSEED,ADX,SMAP,CLFLUSHOPT,MD_CLEAR,MELTDOWN > cpu0: 32KB 64b/line 8-way D-cache, 32KB 64b/line 8-way I-cache, 256KB > 64b/line 4-way L2 cache, 6MB 64b/line 12-way L3 cache > cpu0: smt 0, core 0, package 0 > cpu0: using VERW MDS workaround > pvbus0 at mainbus0: OpenBSD > pvclock0 at pvbus0 > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "OpenBSD VMM Host" rev 0x00 > virtio0 at pci0 dev 1 function 0 "Qumranet Virtio RNG" rev 0x00 > viornd0 at virtio0 > virtio0: irq 3 > virtio1 at pci0 dev 2 function 0 "Qumranet Virtio Network" rev 0x00 > vio0 at virtio1: address fe:e1:bb:d1:69:3f > virtio1: irq 5 > virtio2 at pci0 dev 3 function 0 "Qumranet Virtio Storage" rev 0x00 > vioblk0 at virtio2 > scsibus1 at vioblk0: 1 targets > sd0 at scsibus1 targ 0 lun 0: <VirtIO, Block Device, > > sd0: 24576MB, 512 bytes/sector, 50331648 sectors > virtio2: irq 6 > virtio3 at pci0 dev 4 function 0 "OpenBSD VMM Control" rev 0x00 > vmmci0 at virtio3 > virtio3: irq 7 > isa0 at mainbus0 > isadma0 at isa0 > com0 at isa0 port 0x3f8/8 irq 4: ns8250, no fifo > com0: console > vscsi0 at root > scsibus2 at vscsi0: 256 targets > softraid0 at root > scsibus3 at softraid0: 256 targets > root on sd0a (4d3a796cdb2bafb8.a) swap on sd0b dump on sd0b > > Brian Conway >
