>http://social.technet.microsoft.com/Forums/en-US/winserverhyperv/thread/0d2c5fa8-682c-4f5d-9fe7-388dd80a7e06 >Udv, AZ >_______________________________________________
Üdv, Sok hasonló leírés van, de eddig ez tünik a leghasználhatóbb leírásnak, így már van hibaüzenetem is. d) Install the linuxic drivers a. Open a Terminal b. attach the downloaded LinuxIC.iso through the Hyper-V manager c. Create a folder and copy the contents to the folder d. mkdir /tmp/linuxic e. cp -rp /media/CDROM/* /tmp/linuxic f. cd /tmp/linuxic g. ./setup.pl driver ^^^^^^^^^^^^^^^^^^^^^^^^^^^^3 eddig eljutok, majd itt kiírja hogy telepítette a drivereket, succesfull meg minden, de létrjön a futtató könyvtárba egy drvinstall.err file, amiben csak 2 sor van. sh: make: command not found Ahogy nézem az setup.pl scriptet a végén valamiért rossz ágra fut és azt írja minden rendben, holott azt kéne írnia nézzek bele a drvinstall.err file-ba. Aztán jönnének a: e) Install the mouse driver a. Attach the inputvsc.iso through the Hyper-V manager b. Create a folder and copy the contents. c. mkdir /tmp/inputvsc d. cp -rp /media/CDROM/* /tmp/inputvsc Note: you may need to mount again: mount /dev/hdc /media/CDROM e. cd /tmp/inputvsc f. ./setup.pl itt viszont már nem találja a vmbus driver-t, és érdekes módon nagybetűvel Vmbus drivernek hívja. Van valikinek öttlete? Köszi, KK
<<winmail.dat>>
_______________________________________________ Techinfo mailing list Techinfo@lista.sulinet.hu Fel- és leiratkozás: http://lista.sulinet.hu/mailman/listinfo/techinfo Illemtan: http://www.szag.hu/illemtan.html Ügyfélszolgálat FAQ: http://www.kozhaloportal.hu/gyik/altalanos/