There are no tips on this in WinStips. As only the blue horizontal is affected, I would suspect a yoke, or bad connection on a plug. Try swapping the blue convergence plug with red or green and see if the failure changes color. If it doesn't, suspect the blue convergence yoke. If it does, the problem is in the blue correction circuit, somewhere. I would also expect the overall convergence to be off some at that point. I have the manual downloaded on my 'puter, and can try to send it if you can download this much. The manual is 3,740KB and the schematics are 9,048KB. HTH Walter
--- Julie Perlingiero <[EMAIL PROTECTED]> wrote: > Blue convergence. Horizontal lines badly out at > top left and all along > bottom in all modes. Adjustments will not move > line. Everywhere else is OK. > Replaced IC's and checked the 1.2 ohm return > resistors. Can anyone help? > Want to do in-home if possible due to situation. > > Julie Perlingiero > Chuck's Electronic Repair > (610) 623-2224 > (215) 724-8784 Facsimile > [EMAIL PROTECTED] > > > > _______________________________________________ > Tech Repair CD...order your just $49.00 plus > shipping...One year of updates free. > www.intrepid-video.com www.tech-repair.net > Techs mailing list > [EMAIL PROTECTED] > http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com > ===== Walter Wood United TV Service 501 Poplar St. P.O. box 602 Pulaski Tn. 38478 mailto:[EMAIL PROTECTED] _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
