Mike, 0-6-2-5-9-7-Menu The "Opening Menu" will appear offering choices:
Channel 3 Use Channel 5, u to Select a Channel with Video Remote control key functions: 5, 6, 3, 8: Adjust Convergence M: Advance "cross" location Up, Down, Left, Right 3: Exit Convergence Status: Abort/Cancel Changes M: Begin Convergence Note: Video information must be present to correctly adjust the convergence. A signal source is required to lock the vertical and horizontal sync. After entering the "convergence service mode," verify the presence of a video source by confirming the presence of active audio (use the volume up function on the remote control transmitter). Use the channel up and down function on the remote control transmitter to select the desired tuning source. Select item "M" from the first menu, then the "Convergence Menu" will appear featuring 5 possible selections. Channel 3 Convergence: 1. Green geometry 2. Red to green convergence 3. Blue to green convergence 4. Green to red convergence 5. Green to blue convergence Status: Abort/Cancel Changes Convergence Touch Up Procedure 1. Enter the "convergence service mode" as described above in the "Convergence Service Mode Procedure." 2. Select the desired color requiring adjustment. Note: Do not select Green Geometry (1). This procedure is described under "Major Convergence / Geometry Alignment." If Green Geometry is altered during this procedure, a "Major Convergence / Geometry Alignment" may be required. 3. Cover the output lens of the single color presently not being adjusted. Example: If you select Green to Red Convergence (4), cover the Blue Output Lens. 4. The highlighted adjustment icon (cross) should be illuminated on the middle left side of the screen. Make the necessary convergence adjustments using the following remote keys � Use the Arrow Up Key (5) to adjust the selected color up. � Use the Arrow Down Key (6) to adjust the selected color down. � Use the Arrow Right Key (-) to adjust the selected color to the right. � Use the Arrow Left Key (+) to adjust the selected color to the left. 5. Move to the next location to be converged. It is not required that the full Convergence Sequence be followed while performing the "Convergence Touch Up Alignment Procedure." The following alternate remote keys allow for positioning of the icon to the desired adjustment location: � Key 2 on the remote control transmitter will position the Adjustment Icon upward on the screen. � Key 8 on the remote control transmitter will position the Adjustment Icon downward on the screen. � Key 4 on the remote control transmitter will move the Adjustment Icon to the left. � Key 6 on the remote control transmitter will move the Adjustment Icon to the right. 6. Return to the "Convergence Service Menu" by selecting key 3 on the remote control transmitter or by sequencing the icon to the last adjustment point at the lower right corner of the screen and pushing the Menu (M) Key on the remote control transmitter. 7. Repeat steps 1 through 6 for other required Convergence Alignments. 8. To save the adjustment completed in the last procedure, Exit/Save the convergence service mode by selecting key 1 on the remote control transmitter. This writes the corrections to the EEPROM on the Convergence Module. Note: To save the convergence corrections made above the convergence menu must be exited by selecting Exit/Save Data (1). Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "mgodar" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Wednesday, November 24, 2004 6:32 PM Subject: [Techs] Phillips Magnavox big screen model 7p4841-c101 Hello I need the service code for this model to adjust the static convergence. Set needs to be fine tuned at the right side and bottom. Thanks Mike GODAR ELECT ANTENNA MANUFACTURERS HOME OF THE NEW 2005 HD-3 &HD-4 http://users.mcleodusa.net/m/mgodar TV Service Div. 339 north Gilbert rd. Gilbert Arizona 85234 (480)892-8207 _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com _______________________________________________ Tech Repair CD...order your just $49.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [EMAIL PROTECTED] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
