Mike, >From www.nesda-ohio.com Provided by NESDA of Ohio http://www.nesda-ohio.com
-------------------------------------------------------------------------------- Pioneer Service Menu To Enter Service Mode Look for a poke hole, center of the customer door. Poke to enter/Poke to exit and save. Pioneer has a bad habit of changing their convergence menus access. Sometimes it was mute, recall and other times it was mute chan return. It always started with the little poke hole. Convergence procedures on Pioneer 6 series set. Centered behind the front door is a poke hole. Use a toothpick or similar object to poke the switch once to enter service mode. The mute button will cycle through to a screen that says Static convergence. The adjust key on the remote will change the value of the parameter you are working with. The Chan recall button will cycle through Red and Blue Horizontal and Vertical adjustments. Green is still done with pots on the convergence board. The number keys change the items adjusted and some, but not all, have multiple functions that will cycle through when pressed multiple times. The on screen display will give you some indication of what you are changing. For instance 1 sets the skew and 2 the bow and so forth. It has been my experience that if there is a distortion on one side of the picture, say for instance pin, use the appropriate sub control to make the distortion equal on both sides and use the main pin to take both distortions out at the same time. When you are finished use the poke hole button to exit and save. On the 7 series you have to push Standard AV Mem before mute. In the 8 series set the procedure is similar but the color is changed by the Channel up/down and value is changed by the Volume up/down. It is rather important that before any convergence procedure is done on sets with multipoint convergence you zero out the customer settings. This is done by accessing the customer convergence menu. Go past the center cross and you will be given an option to go to multi point. Select it and then select one of the attention 9 attention points. Press recall on the front of the TV. That will reset any customer correction for that screen size. For sets with more that one screen size do the above procedure for each mode. The above applies to 9 series and higher including the pro700 HDTV models. It is important that you are not fighting customer adjustments when converging. In the "A" series set I believe the only difference is pressing mute several times to enter convergence. Remember you must converge normal and cinema wide separately by pressing the wide or zoom button on the remote. Exit is the same as always. The PRO630 is a 630 HD series set and is not like PRO610 or PRO700. The menu is accessed the same way on the 630 and getting into course adjustments is the same. Pressing the menu button will cycle you through the choice screens. An HD generator is not needed on the 630 but you must use the format button to change between 480P and 1080i. Thanks to Dan Mundy, CET/CSM For the convergence menu in some sets: First go into the customer convergence menu, press recall. This will reset the customer conv. adjustments. Try pressing Mute, AV, Standard, Mute Or-- Try pressing Mute, Mute, Mute Once in the convergence menu, Channel changes color and Volume changes value. OR--Recall on remote changes color and adjust up/down changes setting. Reports say this can change from model to model Jeff -- Intrepid Video TV/VCR Repair 263 S Front St, Steelton PA 17113 717-939-7708; (F) 717-564-4952 www.intrepid-video.com www.tech-repair.net ----- Original Message ----- From: "mgodar" <[EMAIL PROTECTED]> To: <[email protected]> Sent: Wednesday, January 05, 2005 4:47 PM Subject: [Techs] PIONEER big screen tech codes needed Hello Just need the tech enter codes for the Pioneer sd-p4683 . Need to adjust convergence on one corner. Thx Mike Godar Electronics World Class antenna manufacturer Technical service Div http://users.mcleodusa.net/m/mgodar 339 n.Gilbert rd Gilbert AZ. 85234 (480)892-8207 _______________________________________________ Tech Repair CD...order your just $99.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [email protected] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com _______________________________________________ Tech Repair CD...order your just $99.00 plus shipping...One year of updates free. www.intrepid-video.com www.tech-repair.net Techs mailing list [email protected] http://intrepid-video.com/mailman/listinfo/techs_intrepid-video.com
