Hi ,
We have an open position for “RF Design Engineer – Charlotte, NC for 5 months”. Please review the job requirements and let me know if you're interested. Please provide the following Details along with your .doc RESUME. Description - The job will perform moderately difficult tasks that require limited judgment and minimum supervision, but shall confer with technical leads on unusual problems - RF Design Engineer IV is responsible for link budget analysis, initial system design and dimensioning for coverage and capacity, site identification and evaluation, spectrum planning and interference analysis. - RF Design Engineer IV is at advanced skill level for UMTS network design together with basic antenna system optimization - The engineer should be able to undertake RF design related performance improvement tasks - Seasoned experience utilizing RF planning and ACP tools is a must. REQUIRED SKILLS: - Extensive experience with Ericsson network equipment - OSS expertise is a must - A minimum of 8 years work history in RF Design - A minimum of 3 years work history dealing with UMTS - Aircom (Asset) RF planning tool experience is mandatory - Actix (RadioPlan) ACP tool experience is mandatory DESIRED SKILLS: - Prior exposure to Ericsson and Nokia-Siemens UTRAN a strong plus Reply with following Required Details: Name : Visa Status(US Citizen, GC Holder, H1b or TN holder): Contact #: Email id: Current Location (Place & State): Availability Date: Relocation: Last 4-Digits of SSN: Do you give us the exclusive authorization to represent you for this position? (Yes/No) : Thanks and Regards Sri Ph: 248-522-6862 Fax: 248-538-8435 [email protected] <http://www.compusoft-is.com/> CompuSoft Integrated Solutions, Inc.
