I did not see any errors like this when I did mine sorry. Time to open a support ticket.
-----Original Message----- From: [email protected] [mailto:[email protected]] On Behalf Of Dan Petermann Sent: Tuesday, July 26, 2016 2:18 PM To: [email protected] Subject: Re: [Telrad] 4x4 Thank you for the confirmation. Any idea why I am getting the error on one sector? This is a new install with no customers yet. On Jul 26, 2016, at 11:51 AM, Gabriel Pike <[email protected]> wrote: > > That is correct. Don't forget to reboot after saving changes. > > > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Dan Petermann > Sent: Tuesday, July 26, 2016 1:49 PM > To: [email protected] > Subject: [Telrad] 4x4 > > In firmware version 0606.04013, are all 4 antenna ports able to be used? > > Is the process of enabling them simply to set the drop down panels to > Operative? > > The reason I ask is on one eNB I get the following error: > RH, Port3 RH HW Failure Power Detector Min > RH, Port4 RH HW Failure Power Detector Min > > > _______________________________________________ > Telrad mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/telrad > > _______________________________________________ > Telrad mailing list > [email protected] > http://lists.wispa.org/mailman/listinfo/telrad _______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad _______________________________________________ Telrad mailing list [email protected] http://lists.wispa.org/mailman/listinfo/telrad
