Our average is low to Mid 20's on CINR and worst being between 10 and 12. We have 10 gig fiber uplinks where the EPC's are located with licensed 2+0 to each tower where eNB's are located. Latency between EPC and all eNB's is 1 ms or less.
-- Justin Davis COO SkyWerx Industries, LLC > On Mar 14, 2017, at 10:06 PM, Scott <lamb...@lambertfam.org> wrote: > > Hi Justin, > > What is your minimum CINR? What network do you have between your EPCs > and the eNB's? > > Thanks! > >> On 3/14/17 10:58 PM, Skywerx Support wrote: >> We were contacted by Telrad to beta test their embedded EPC into eNB >> about a month ago. What can I say. It performs just like the other >> platform. We loaded up 40 >> UE's on the new eNB and works like a champ. We only have one of these >> deployed and I would feel comfortable putting an additional 30-40 UE's >> on it. FYI we are also running 1 and 1 with 20 MHz wide channels. Not >> sure what the difference is but I will continue to talk positively >> about our experience and the 10 other organizations that we are >> affiliated with that have deployed Telrad and are experiencing similar >> outcomes as Skywerx. >> > > -- > Scott Lambert KC5MLE Unix SysAdmin > lamb...@lambertfam.org > _______________________________________________ > Telrad mailing list > Telrad@wispa.org > http://lists.wispa.org/mailman/listinfo/telrad _______________________________________________ Telrad mailing list Telrad@wispa.org http://lists.wispa.org/mailman/listinfo/telrad