On 08/13/2010 12:12 AM, Patrick Lists wrote:
> On 08/12/2010 10:43 PM, Adam Williamson wrote:
>> On Thu, 2010-08-12 at 22:35 +0200, François Cami wrote:
>>
>>> OK here on RV410 (Radeon X700 Pro, R400 family), using KMS.
>>> I will be testing older cards (Radeon 7500, FireGL 8800) as time permits.
>>
>> Thanks, Francois! Jerome mentioned he has a reproducer now, a specific
>> monitor, but the testing is still useful to help us figure out how wide
>> the impact of this is.
>
> Also tested a box with a Gigabyte X58 board and an ATI HD 5970 PCI-E
> card and when X starts the screen goes black then I see a popup from the
> monitor that no signal was detected. Then nothing. The screen stays
> black and the led on the monitor goes orange which is basically saying
> it's got nothing to do. The monitor is an Iiyama Prolite B2409 HDS
> connected via a DVI cable.
Maybe the output of lspci -v of the card is of use:
09:00.0 Display controller: ATI Technologies Inc Device 689c
Subsystem: ATI Technologies Inc Device 2042
Flags: bus master, fast devsel, latency 0, IRQ 55
Memory at d0000000 (64-bit, prefetchable) [size=256M]
Memory at fb6e0000 (64-bit, non-prefetchable) [size=128K]
I/O ports at 8e00 [size=256]
Expansion ROM at fb600000 [disabled] [size=128K]
Capabilities: [50] Power Management version 3
Capabilities: [58] Express Legacy Endpoint, MSI 00
Capabilities: [a0] MSI: Enable+ Count=1/1 Maskable- 64bit+
Capabilities: [100] Vendor Specific Information: ID=0001 Rev=1 Len=010
<?>
Capabilities: [150] Advanced Error Reporting
Kernel driver in use: radeon
Kernel modules: radeon
Will also try radeon.modeset=0 and report back.
Regards,
Patrick
--
test mailing list
test@lists.fedoraproject.org
To unsubscribe:
https://admin.fedoraproject.org/mailman/listinfo/test
