Hi Frank,
On 24/05/12 14:08 UTC, Frank Murphy wrote: > # dracut initramfs-3.5.0-0.rc0.git3.1.fc18.x86_64 > 3.5.0-0.rc0.git3.1.fc18.x86_64 > F: installkernel failed in module multipat > > # rpm -qa | grep multipath > device-mapper-multipath-libs-0.4.9-22.fc18.x86_64 > device-mapper-multipath-0.4.9-22.fc18.x86_64 I had the same problem, but just on my 32bit Rawhide. Indeed, those two packages (device-mapper-multipath and device-mapper-multipath-libs) were installed on the x86_64 Rawhide. So, the solution/work-around is simple: # rpm -e device-mapper-multipath-libs-0.4.9-22.fc18.x86_64 device-mapper-multipath-0.4.9-22.fc18.x86_64 # dracut That time, the initramfs should be created. Just check that it has been created. For instance: # ls -l /boot/initramfs-3.5.0-0.rc0.git3.1.fc18.x86_64.img Then, of course, you have to update the Grub2 configuration, by adding the following lines to /etc/grub2.cfg: <tab>echo 'Loading initial ramdisk ...' <tab>initrd /initramfs-3.5.0-0.rc0.git3.1.fc18.x86_64.img Note that, if you do not have a dedicated /boot partition, you should add the /boot prefix in the above line. That's basically it. Regards Denis
-- test mailing list test@lists.fedoraproject.org To unsubscribe: https://admin.fedoraproject.org/mailman/listinfo/test