On 2013-06-11 03:59, Cristian Sava wrote:
I am testing F19-TC2 LXDE in a VirtualBox.
Now "network" instead NM is working as expected.
We do not have the "device" mentioned in
/etc/sysconfig/network-scripts/ifcfg-enp0s3
How is advised to add an alias interface?
Do we have to get the interface name from "route" or whatever and add
it
in ifcfg-enp0s3:0 as DEVICE=p2p1:0 ?
Do we still need to use /etc/rc.d/rc.local for that?
I did not find any obvious hint on the net, so an advice is welcome.
[cristi@localhost network-scripts]$ sudo systemctl disable
NetworkManager.service
[sudo] password for cristi:
rm
'/etc/systemd/system/multi-user.target.wants/NetworkManager.service'
rm '/etc/systemd/system/dbus-org.freedesktop.NetworkManager.service'
[cristi@localhost network-scripts]$ sudo systemctl stop
NetworkManager.service
[cristi@localhost network-scripts]$ sudo systemctl enable
network.service
network.service is not a native service, redirecting to
/sbin/chkconfig.
Executing /sbin/chkconfig network on
[cristi@localhost network-scripts]$ sudo systemctl start
network.service
[cristi@localhost network-scripts]$ route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
default 10.0.2.2 0.0.0.0 UG 0 0 0 p2p1
10.0.2.0 * 255.255.255.0 U 1 0 0 p2p1
link-local * 255.255.0.0 U 1002 0 0 p2p1
[cristi@localhost network-scripts]$ ping fw.xx.yy.ro
PING fw.xx.yy.ro (193.x.y.253) 56(84) bytes of data.
64 bytes from fw.xx.yy.ro (193.x.y.253): icmp_seq=1 ttl=63 time=2.06
ms
64 bytes from fw.xx.yy.ro (193.x.y.253): icmp_seq=2 ttl=63 time=0.801
ms
64 bytes from fw.xx.yy.ro (193.x.y.253): icmp_seq=3 ttl=63 time=0.808
ms
^C
--- fw.xx.yy.ro ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2003ms
rtt min/avg/max/mdev = 0.801/1.223/2.061/0.593 ms
[cristi@localhost network-scripts]$
cat /etc/sysconfig/network-scripts/ifcfg-enp0s3
PEERROUTES="yes"
IPV6INIT="yes"
UUID="e4e1bc69-70c3-49d2-a991-68a8e7533485"
IPV6_PEERDNS="yes"
DEFROUTE="yes"
PEERDNS="yes"
IPV4_FAILURE_FATAL="no"
HWADDR="08:00:27:88:5C:09"
BOOTPROTO="dhcp"
IPV6_DEFROUTE="yes"
IPV6_AUTOCONF="yes"
IPV6_FAILURE_FATAL="no"
IPV6_PEERROUTES="yes"
TYPE="Ethernet"
ONBOOT="yes"
NAME="enp0s3"
[cristi@localhost network-scripts]$
Cristian Sava
If you're using vlan would this work? "ip link add link eth0 name
eth0.10 type vlan id 10 (Creates a new vlan device eth0.10 on device
eth0)."
http://rpm.pbone.net/index.php3/stat/45/idpl/20307932/numer/8/nazwa/ip-link
--
test mailing list
test@lists.fedoraproject.org
To unsubscribe:
https://admin.fedoraproject.org/mailman/listinfo/test