The output is located @

/net/girltalk2.sfbay/export/mishra/atge-L1-chip/nfscorrupt.txt

IP  129.146.105.208  (root/l1admin)

But it's a DHCP address and it's up to DHCP server to revoke/assign a 
new IP.

I'm on vacation for next 4-weeks; So I can work on this only after 1st 
December.

Thanks,
/Saurabh

tian robin luo wrote:
> Could you help to show the output of "kstat -p e1000g:0" and "netstat -s" ?
> Or can we access the two systems to check? It seems we cannot reproduce 
> this problem locally.
> 
> Thanks,
> Robin
> 
> Saurabh Misra:
>>
>> Thanks. I was able to install NICDRV tests.
>>
>> I'm still seeing 'FAIL: Wrote crc:5be9041b Read crc:15182f55 
>> Pattern:E1 ' failure in the nfscorrupt tests  with e1000g0 (SUT)  vs 
>> e1000g0 (TM) connected back to back.
>>
>> More details below.
>>
>> Thanks,
>> /Saurabh
>>
>> root at opensolaris:~# ifconfig -a
>> lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 
>> 8232 index 1
>>         inet 127.0.0.1 netmask ff000000
>> bfe0: flags=1004843<UP,BROADCAST,RUNNING,MULTICAST,DHCP,IPv4> mtu 1500 
>> index 2
>>         inet 129.146.105.60 netmask fffffe00 broadcast 129.146.105.255
>>         ether 0:10:18:4:58:80
>> atge0: flags=1000802<BROADCAST,MULTICAST,IPv4> mtu 1500 index 3
>>         inet 0.0.0.0 netmask 0
>>         ether 0:1b:fc:b9:71:96
>> e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 
>> index 4
>>         inet 10.10.10.1 netmask ffffff00 broadcast 10.10.10.255
>>         ether 0:2:b3:d8:17:f8
>> lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 
>> 8252 index 1
>>         inet6 ::1/128
>> bfe0: flags=2004841<UP,RUNNING,MULTICAST,DHCP,IPv6> mtu 1500 index 2
>>         inet6 fe80::210:18ff:fe04:5880/10
>>         ether 0:10:18:4:58:80
>> root at opensolaris:~# dladm show-phys
>> LINK         MEDIA                STATE      SPEED  DUPLEX    DEVICE
>> bfe0         Ethernet             up         100    full      bfe0
>> atge0        Ethernet             unknown    0      unknown   atge0
>> e1000g0      Ethernet             up         1000   full      e1000g0
>> root at opensolaris:~#
>>
>> root at opensolaris:~# uname -a
>> SunOS opensolaris 5.11 onnv-gate:2009-10-11 i86pc i386 i86pc Solaris
>>
>> root at opensolaris:~# rsh 10.10.10.2 'uname -a; ifconfig -a; dladm 
>> show-phys'
>> SunOS opensolaris 5.11 snv_121 i86pc i386 i86pc
>> lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 
>> 8232 index 1
>>         inet 127.0.0.1 netmask ff000000
>> e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 
>> index 2
>>         inet 10.10.10.2 netmask ff000000 broadcast 10.255.255.255
>>         ether 0:1c:c0:26:56:7d
>> lo0: flags=2002000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv6,VIRTUAL> mtu 
>> 8252 index 1
>>         inet6 ::1/128
>> LINK         MEDIA                STATE      SPEED  DUPLEX    DEVICE
>> e1000g0      Ethernet             up         1000   full      e1000g0
>> root at opensolaris:~#
>>
>> root at opensolaris:~# cat 
>> /var/tmp/SUNWstc-driver-nicdrv/results/journal.opensolaris.20091030015217.execute.amd64
>>  
>>
>> Start| 20091030 root (0) | tpi 1.4 | 01:52:17 88175652138843 0 |
>> Start| 6866 SunOS 5.11 onnv-gate:2009-10-11 i86pc opensolaris |
>> STF_ENV| STC_NAME = driver-nicdrv |
>> STF_ENV| STC_VERSION = 2.3 |
>> STF_ENV| STC_OS_VERSION = 5.11 |
>> STF_ENV| STF_EXECUTE_MODE = amd64 |
>> STF_ENV| cwd = /opt/SUNWstc-driver-nicdrv/tests/functional/test03 |
>> Test_Case_Start| 6965 tests/functional/test03/runme | 01:52:18 
>> 88176610308587 0 |
>> stdout|
>> stdout| ASSERTION ID: functional/test03
>> stdout|
>> stdout| DESCRIPTION:
>> stdout|          Test and verify that no data corruptions are found
>> stdout|          during data transmit/receive
>> stdout|
>> stdout| STRATEGY:
>> stdout|          - Run nfscorrupt TCP traffic on test interface for 1 
>> hour
>> stdout|          - Run nfscorrupt UDP traffic on test interface for 1 
>> hour
>> stdout|          - Test should pass without data corruptions
>> stdout|           - For WiFi drivers, only one session will be setup
>> stdout|
>> stdout| TESTABILITY:  implicit
>> stdout|
>> stdout| 10.10.10.2 is alive
>> stdout| 10.10.10.1 is alive
>> stdout| Cleaning any old mounts . . DONE
>> stdout| Checking disk space .opensolaris is alive
>> stdout|  . . DONE
>> stderr| svcadm: svc:/milestone/network depends on 
>> svc:/network/physical, which has multiple instances.
>> stderr| svcadm: svc:/milestone/network depends on 
>> svc:/network/physical, which has multiple instances.
>> stderr| svcadm: svc:/milestone/network depends on 
>> svc:/network/physical, which has multiple instances.
>> stderr| svcadm: svc:/milestone/network depends on 
>> svc:/network/physical, which has multiple instances.
>> stderr| svcadm: svc:/milestone/network depends on 
>> svc:/network/physical, which has multiple instances.
>> stderr| svcadm: svc:/milestone/network depends on 
>> svc:/network/physical, which has multiple instances.
>> stderr| svcadm: svc:/milestone/network depends on 
>> svc:/network/physical, which has multiple instances.
>> stderr| svcadm: svc:/milestone/network depends on 
>> svc:/network/physical, which has multiple instances.
>> stdout| Configuring nfs . DONE
>> stdout| Distributing the test binary . . DONE
>> stdout| Configuring mount points . . . . . . . . . . DONE
>> stdout| Starting Corrupt . . . . . . . . . . DONE
>> stdout| Corrupt Started.  Running for 900 seconds
>> stdout| Waiting for processes to finish DONE
>> stdout| Corrupt Results for opensolaris Completed 2009-10-30_01:56:20
>> stdout|
>> stdout| Results for 10.10.10.1 --> 10.10.10.2 session# 1
>> stdout| KILLED:run on error is no
>> stdout|
>> stdout| Results for 10.10.10.1 --> 10.10.10.2 session# 2
>> stdout| KILLED:run on error is no
>> stdout|
>> stdout| Results for 10.10.10.1 --> 10.10.10.2 session# 3
>> stdout| KILLED:run on error is no
>> stdout|
>> stdout| Results for 10.10.10.1 --> 10.10.10.2 session# 4
>> stdout| KILLED:run on error is no
>> stdout|
>> stdout| Results for 10.10.10.1 --> 10.10.10.2 session# 5
>> stdout| KILLED:run on error is no
>> stdout|
>> stdout| Results for 10.10.10.2 --> 10.10.10.1 session# 1
>> stdout| KILLED:run on error is no
>> stdout|
>> stdout| Results for 10.10.10.2 --> 10.10.10.1 session# 2
>> stdout| KILLED:run on error is no
>> stdout|
>> stdout| Results for 10.10.10.2 --> 10.10.10.1 session# 3
>> stdout| KILLED:run on error is no
>> stdout|
>> stdout| Results for 10.10.10.2 --> 10.10.10.1 session# 4
>> stdout| KILLED:run on error is no
>> stdout|
>> stdout| Results for 10.10.10.2 --> 10.10.10.1 session# 5
>> stdout| FAIL: Wrote crc:5be9041b Read crc:15182f55 Pattern:E1 
>> Filesize:225772
>> stdout| KILLED:run on error is no
>> stdout|
>> stdout| Setup Summary
>> stdout| ======================================
>> stdout| PRODUCT      : nicdrv
>> stdout| CLIENT_INT   : 10.10.10.2
>> stdout| SERVER_INT   : 10.10.10.1
>> stdout| SESSIONS     : 5
>> stdout| TIME         : 900 sec
>> stdout| TRAFFIC_TYPE : bi
>> stdout| PROTO        : tcp
>> stdout| RUN_ON_ERROR : no
>> stdout|
>> stdout|
>> stdout| Corrupt Status
>> stdout| ======================================
>> stdout| FAILED: Found 1 Failures in logfile
>> stderr| nfs umount: /mnt/10.10.10.2_1: is busy
>> stderr| rm: cannot remove directory `/mnt/10.10.10.2_1': Device busy
>> stderr| nfs umount: /mnt/10.10.10.1_1: is busy
>> stderr| rm: Unable to remove directory /mnt/10.10.10.1_1: Device busy
>> stderr| nfs umount: /mnt/10.10.10.1_2: is busy
>> stderr| rm: Unable to remove directory /mnt/10.10.10.1_2: Device busy
>> stderr| nfs umount: /mnt/10.10.10.2_3: is busy
>> stderr| rm: cannot remove directory `/mnt/10.10.10.2_3': Device busy
>> stderr| nfs umount: /mnt/10.10.10.1_3: is busy
>> stderr| rm: Unable to remove directory /mnt/10.10.10.1_3: Device busy
>> stderr| nfs umount: /mnt/10.10.10.2_4: is busy
>> stderr| rm: cannot remove directory `/mnt/10.10.10.2_4': Device busy
>> stderr| nfs umount: /mnt/10.10.10.1_4: is busy
>> stderr| rm: Unable to remove directory /mnt/10.10.10.1_4: Device busy
>> stderr| nfs umount: /mnt/10.10.10.2_5: is busy
>> stderr| rm: cannot remove directory `/mnt/10.10.10.2_5': Device busy
>> stderr| nfs umount: /mnt/10.10.10.1_5: is busy
>> stderr| rm: Unable to remove directory /mnt/10.10.10.1_5: Device busy
>> stdout| Removing mount points . . . . . . . . . . . . . . . . . . . 
>> .Restarting nfs . DONE
>> stdout| Restarting nfs . DONE
>> stdout|  DONE
>> Test_Case_End| 6965 tests/functional/test03/runme | FAIL | 01:56:25 
>> 88423465270097 0 |
>> Test_Case_Start| 7823 tests/cleanup | 01:56:25 88423533676313 0 |
>> stdout| Cleanup and generate report...
>> stdout| ==========================================================
>> stdout| ==================== Test Summary ========================
>> stdout| ==========================================================
>> stdout| ------------------------------------------
>> stdout| ----- Print Local Host Configuration -----
>> stdout| ------------------------------------------
>> stdout| SunOS opensolaris 5.11 onnv-gate:2009-10-11 i86pc i386 i86pc 
>> Solaris
>> stdout| bfu'ed from 
>> /net/onnv.sfbay/export/onnv-gate/archives/i386/daily.1011-nd/ on 
>> 2009-10-13
>> stdout|  OpenSolaris Development snv_122 X86
>> stdout| 189 fffffffff7fd5000  37398 115   1  e1000g (Intel PRO/1000 
>> Ethernet)
>> stdout| ------------------------------------------
>> stdout| ----- Print Remote Host Configuration ----
>> stdout| ------------------------------------------
>> stdout| SunOS opensolaris 5.11 snv_121 i86pc i386 i86pc
>> stdout|  OpenSolaris Development snv_121 X86
>> stdout| 171 fffffffff7f91000  34428  91   1  e1000g (Intel PRO/1000 
>> Ethernet)
>> stdout| ------------------------------------------
>> stdout| _bAseLinE_STF 1.4
>> stdout| tests/functional/test03/runme  FAIL:1
>> stdout|
>> stdout| Result Total:
>> stdout|         FAIL: 1
>> stdout| Cleanup Done.
>> Test_Case_End| 7823 tests/cleanup | PASS | 01:56:25 88423859240338 0 |
>> End| 7852 01:56:25 88423896274437 |
>> root at opensolaris:~#
>>
>>
>>
>>
>>
>> yuan.fan wrote:
>>> Hi Saurabh
>>>
>>> auto_nicdrv_0924 can not use because of opensolaris website changes.
>>> This issue has been fixed,please download latest auto_nicdrv_1029 at
>>>
>>> http://hub.opensolaris.org/bin/download/Community+Group+device_drivers/nicdrvtest/autonicdrv1029.tar.bz2
>>>  
>>>
>>>
>>> Any questions please let us know.
>>>
>>> thanks
>>> -yuan
>>
>>
> 


-- 
http://saurabhslr.blogspot.com/

Reply via email to