On 16 October 2010 18:32, Tabitha Roder <[email protected]> wrote: > Tested the new powerd on XO-1.0 with 0.84.16 build 852 for Jerry. Closed the > lid and it goes to sleep (light flashing). Open lid and it restarts > immediately. Did the lid open and immediately reclose test and after several > attempts reproduced the lid closed and laptop on fault. I believe we > installed it correctly, yum -qa reports: > olpc-powerd-29-1.fc11.i586 > olpc-powerd-dbus-29-1.fc11.i586 > > Tested the new powerd on XO-1.5 on os852 for Jerry. Found it behaved as > advertised -- had to press the power button to resume. Found that if you > close and reopen immediately the goes blank but the power light stays on. > Closing again causes the normal flashing power light sleep and pressing a > key instead of closing the lid gets it out of the strange display off but > power on state so I don't think this is a problem.
Thanks so much guys. I'd also like to stress that Jerry's builds here are the test builds for OLPC Australia. In other words, you've done kids here in Australia a big favour :) Sridhar Dhanapalan Technical Manager One Laptop per Child Australia M: +61 425 239 701 E: [email protected] A: G.P.O. Box 731 Sydney, NSW 2001 W: www.laptop.org.au Be Part of the Equation.... Show your support for OLPC Australia by texting the word LAPTOP to 044 SUPPORT (0447 877 678)* For every 100 messages of support received, Telstra will donate an additional XO laptop to a remote child - up to 500 XOs** *Standard SMS charges apply **Full terms and conditions at Ideas for Good _______________________________________________ Testing mailing list [email protected] http://lists.laptop.org/listinfo/testing
