Daniel Drake wrote:
Hi Thomas,
On 17 July 2011 02:39, Thomas C Gilliard <[email protected]> wrote:
http://wiki.sugarlabs.org/go/Talk:Community/Distributions/Fedora#testing_os873_XO-1.5
With preliminary testing of Chat 70 collaboration using os873 on XO-1 and
os873 on XO-1.5
Thanks a lot for testing and feedback! Your help is much appreciated.
Just one question, I don't understand one section of your report.
Could you explain the following in more detail?
XO-1 Mesh Network 1>AD hoc Network 1 ; AD hoc Network 6; AD hoc
Network 11 no avitars
XO-1.5 AD hoc 1 on >shows as 4th connection point on X0-1 after 2 min
XO-1.5 Click on AD hoc 1 and see avitars?
Not Connected to Wireless AP: (tested today)
os873 on the XO-1 displays different icons in the f1 neighborhood for
the three mesh networks, than the XO-1.5 does.
(2 concentric circles and a dot on the XO-1 and a single circle with a
dot and underlines ;mayan? symbols; on the XO-1.5)
In XO-1.5 connect to Circle and dot; after about 2 minutes it (4th icon:
named Ad-hoc Network 1) appears on the XO-1. Connect to it on XO-1 and
the others laptops Avitar appears in both F1 neighborhoods. Now sharing
of Chat-70 is possible.
Disconnect on both; XO-1 tries to connect to all 3 Mesh Networks
connects to Mesh Network 1
No connection to XO-1.5
Icons remain on XO-1 screen after disconnect. After connecting to all
three on XO-1.5' have 6 icons on XO-1 screen.
Synopsis: connections only work if initiated from XO-1.5 to the XO-1 but
not the other way around.
There is no indication on the XO-1 which AD-hoc network is active on
XO-1.5 before connecting to it.
Why does it work this way?
Tom Gilliard
Names:
On XO-1: Mesh Network 1, 6, 11
On XO-1.5: AD-hoc Network 1, 6, 11
Thanks,
Daniel
_______________________________________________
Testing mailing list
[email protected]
http://lists.laptop.org/listinfo/testing
