Hi all Can you explain in a brief about the below mentioned issue.What actually " n Editor" means?
n Editor: When I mouseover the scissors, the drop down covers the first 3 lines of text - makes it difficult if one is trying to work on those particular lines. Otherwise seems to be working ok. Regards Deepak On 19 March 2012 13:53, Deepak Muddha <[email protected]> wrote: > Hi all > > Here are the links for the issues mentioned against build 206 11.3.1-au” > on XO 1.5 > > On 17 March 2012 15:01, Tabitha Roder <[email protected]> wrote: > >> Testing Summary, Auckland - 17 March 2012 >> Who: Fabiana, John, Oliver, Rachel, Tom >> >> Tested build “30 customized” on XO-1.75 and “build 206 11.3.1-au” on XO >> 1.5. >> >> XO-1.5 Summary (details below): >> Power saving blanks the screen while recording a video: >> http://dev.laptop.org.au/issues/1164 >> Terminal font still too big: http://dev.laptop.org.au/issues/1087 >> Jigsaw puzzle quite slow for complex puzzles: >> http://dev.laptop.org.au/issues/1165 >> Saving custom Memorize games still a problem: >> http://dev.laptop.org.au/issues/1166 >> Shared memorize had lots of Ivy’s clustered around it in the >> neighbourhood: http://dev.laptop.org.au/issues/1167 >> Flipsticks doesn’t work so well: http://dev.laptop.org.au/issues/1168 >> Visual match style changes don’t work: >> http://dev.laptop.org.au/issues/1169 >> >> >> XO-1.75 Summary (details below): >> B1 clock reset breaks yum, makes recovery more difficult >> Browse crashed, gained some insight into google docs stability >> Chat is much less chatty on the network when used with the >> schoolserver, suspend and resume really really good in this situation. >> Maze crashes immediately when collaborating >> >> Power logs attached. >> >> >> build 206 11.3.1-au on XO 1.5: >> Rosella: >> Record activity - works fine for photo and video. high and low res. >> even long ones. But quite quickly the screen goes black - it is not >> going to sleep - there is no flashing of the power light and it >> continues recording. On Ivy it takes 1 minute to go black. Tabitha >> raised the issue that since the screen goes black you might not know >> you are being recorded and that might not be a good thing. >> On on occasion on Ivy, record showed the preview (with a line of >> “noise” pixels at the bottom), but the preview went black during video >> recording and the camera light went out. Pressing stop left a busy >> pointer. Record exited normally. Log is attached. >> >> Paint: Seems to be working ok. >> >> Terminal: The font is too big - true that hitting the zoom button can >> make the font smaller, but the large default font makes the welcome >> screen look awkward as the ‘welcome children of the world’ sentence >> breaks in a wierd place and this remains after zooming down. >> >> General: The time to ‘sleep’ seems really fast. Even leaving the >> laptop unattended for a short time turns the screen black which I find >> quite annoying.: http://dev.laptop.org.au/issues/1173 >> >> >> Stopwatch - seems to work but I still think it would be nice to be >> able to save the times that were marked to use in a different actiity >> (like write, to write a lab report) Seems silly that I would have to >> write that on paper to transfer to a document.: >> http://dev.laptop.org.au/issues/1170 >> >> >> Calculate: basic functions seem to be working ok. Sort of odd that >> when I get an error message not all letters in the message are the >> same colour.: http://dev.laptop.org.au/issues/1174 >> >> >> Physics: Still have trouble drawing short lines - i see the cursor >> track but dont get a line drawn. Is there a minimum length it expects?: >> http://dev.laptop.org.au/issues/1148 >> >> >> Jigsaw puzzle - too much lag when trying to move the pieces - makes it >> very difficult to play. This seems to be a problem as the number of >> pieces of the puzzle increases (not a problem in the setting for few >> puzzle pieces). When I start the actiivty and choose a puzzle it will >> not show me the puzzle when I hit solve - need to hit shuffle. Same >> with Slider Puzzle activity.: http://dev.laptop.org.au/issues/1165 >> >> >> n Editor: When I mouseover the scissors, the drop down covers the >> first 3 lines of text - makes it difficult if one is trying to work >> on those particular lines. Otherwise seems to be workinng ok.: >> http://dev.laptop.org.au/issues/1175 >> >> >> Compris Click game - seems ok. >> >> Poll: I can build a poll but after I close, I don't seem to be able to >> find it. Where is the ‘choose a poll’ point to? I did save my poll.... >> I can, however, reopen it from the journal, but it would be useful to >> see it on hte choose a poll when i start poll again (I am not starting >> as ‘new’).: http://dev.laptop.org.au/issues/1178 >> >> >> Measure: Seems ok. >> >> Slider Puzzle activity: When I start the activity and choose a puzzle >> it will not show me the puzzle when I hit solve - need to hit shuffle. >> Just like with jigsaw.: http://dev.laptop.org.au/issues/1172 >> >> >> Ivy: GCompris click game - when you shut off the lid, the game seems >> to continue to play cause the computer keeps making giggly noises - >> seems like a waste of battery.: http://dev.laptop.org.au/issues/1176 >> >> >> Memorize - really struggle with saving the games you create yourself. >> It is not user friendly or intuitive. Found that the only method that >> did reliably save your game in the Journal was if you clicked on one >> pair of tiles and then clicked on “update this pair”. That doesn’t >> seem a relevant method to save the game in the Journal. We spent quite >> a lot of time on this using Ivy and Poppy. We wanted to easily be able >> to save games that we make for each topic we are studying (so you can >> set a homework task to create these games and then share them with >> your classmates the next day in each class). >> >> Shared memorize on ivy on adhoc network and ended up with 6 ivy’s >> around the memorize activity! Not sure how this is possible, see: >> >> https://picasaweb.google.com/lh/photo/_Oov9ppYnvvKIAHN1n0m8dMTjNZETYmyPJy0liipFm0?feat=directlink >> >> TuxMath (Ivy) worked. Suitably irritated everyone around. >> >> Cartoon Builder (Ivy) worked. Again, it irritated everyone around, >> other than the baby who loved it for about two minutes. >> >> Flipsticks (Ivy) sort of crashed. I posed the stick figure and saved >> different poses in each keyframe. Played the frames, changed the >> speed. Got black screen. Managed to get to activity ring and start >> Terminal to type Top. Found X using 75% of CPU and Flipsticks using >> 20% of CPU. Waited a long time and eventually got the Flipsticks >> screen back, sort of. But the stick figure was moving along half off >> the screen which didn’t match the keyframes. On a restart I can reset >> the position in each of the keyframes but wonder how they all were >> broken. >> >> Poll (Ivy) works. Would be neat if you could create a poll where the >> participants had to choose their answers in order of preference. e.g. >> Put the colours into a list from the most liked to the least liked.: >> http://dev.laptop.org.au/issues/1171 >> >> >> Maze (Ivy) worked. >> >> Moon (Ivy) worked. >> >> Numbers (Ivy) worked. Got a bit muddled when I was thinking about >> BEDMAS but found the game knew what to do so I just had to do my >> things in order. e.g. number required was “30” and you have “3 3 7” to >> use, so you have to make “3+7=10” then you can make “3x10” as if you >> do “3+7x3” you don’t get the right answer. Perfect. >> >> Visual Match (Ivy) broken. The button with the 5 escaping from a box >> has a whole lot of other game styles on it’s sub toolbar but they all >> just cause a reshuffle with no change in the tiles. >> >> Gcompris clickgame (Ivy) - interestingly we could hear this playing >> its sounds while we were not using it (yes, I was playing with the >> baby). The game didn’t seem to sleep when the computer was idle. >> >> Clock (Ivy) worked. >> >> Ruler (Ivy) worked. >> >> Terminal (Ivy) starts. No further testing done. >> >> Paint (Ivy) tried most tools but not all, found all that I tried >> worked. For the first time, I have noticed that the greyscale button >> and the rainbow button being next to each other suggests they are >> similar tools when in fact they are not. The greyscale button strips >> the colours out of your picture. The rainbow button gives you a >> rainbow coloured pen to draw with. Maybe they should not be situated >> next to each other.: http://dev.laptop.org.au/issues/1177 >> >> >> power logs were not collected last week because my power log collector >> attempts to mount ext3 and the filesystem is ext4 and somehow >> incompatible. Removing the manual filesystem type option to mount >> fixes the situation. I don’t know why I set this option in the first >> place? Maybe it makes mounting faster? or it’s only needed on XO-1? >> Will test that shortly. >> >> XO-1.75 os30 testing for OLPC >> Discovered one reason for the erratic behavior of yum on XO 1.75. >> Bonnie fairly regularly looses the time (known problem in the B1 >> prototypes), resetting to January 2000, when you use yum to get >> ntpdate to fix the time, yum fails with a cryptic message: >> >> [olpc@xo-6d-6c-3a ~]$ sudo yum install ntpdate >> Error: Cannot retrieve repository metadata (repomd.xml) for >> repository: fedora. Please verify its path and try again >> >> Using tcpdump and wireshark we find that the reason is that the >> certificate on mirrors.fedoraproject.com is not valid until some time >> after the year 2000. Maybe we should install ntpdate by default? >> >> Browse on os30 hung while entering my google password, unfortunately I >> wasn’t able to diagnose. The “do you want to save this password” >> dialog appeared and wouldn’t go away, with the refresh of the browser >> itself behind stuck. The force quit dialog appeared in Portuguese and >> I chose the wrong option and killed it :( >> >> Chat on os30 with schoolserver produces far less traffic than on os29 >> on adhoc network. We could wait for a laptop to go to sleep and then >> send a message in chat and within a second the other laptop wakes up, >> receives it and goes back to sleep! Chat seems to have no problems >> with sleep or latency when used with schoolserver. >> >> Discovered a possible reason for unstable google docs on Browse on XO >> 1.75 -- if someone types fast enough into the doc on another computer, >> Browse can’t keep up, you can watch their changes coming in a couple >> of words at a time (including words which then get deleted) with a >> delay of a couple of minutes. I suspect it will recover if the other >> user stops typing for long enough but we didn’t wait long enough. This >> would explain why sometimes it works and sometimes it doesn't -- it >> depends on how fast the changes come. >> >> Maze crashes almost immediately when you collaborate, I think we >> reported this before? There is an exception in the logs (attached). >> This happens on all versions we’ve tried recently, not just os30. >> >> Had record crash once after playing a video. >> >> _______________________________________________ >> Testing mailing list >> [email protected] >> http://lists.laptop.org/listinfo/testing >> >> > > > -- > *_______________________________________________________ > * > > *Deepak Muddha > Software Test Engineer > * > * > One Laptop per Child Australia* > * > M: 91 8897367762 > E: [email protected] > W: **www.laptop.org.au* <http://www.laptop.org.au/>*<[email protected]> > * > > -- *_______________________________________________________ * *Deepak Muddha Software Test Engineer * * One Laptop per Child Australia* * M: 91 8897367762 E: [email protected] W: **www.laptop.org.au* <http://www.laptop.org.au/>* <[email protected]>*
_______________________________________________ Testing mailing list [email protected] http://lists.laptop.org/listinfo/testing
