On 14/05/12 10:48, James Cameron wrote:
Thanks for testing!
On Sun, May 13, 2012 at 07:02:05PM +1200, Tom Parker wrote:
We tested 12.1.0 for XO-1.75, customized (build 9) and 12.1.0 for
XO-1.5, customized (build 9)
On the XO-1.75, the internal microphone is only fed to the left
channel input on the codec chip. The right channel should have no
audio detected when there is no external microphone plugged in.
Do you think that our kernel should behave as if both channels have
the same data on XO-1.75?
Does the audio system have the ability to flag that the microphone is
mono? If so, that seems preferable to pushing the same data through both
channels. Perhaps it is already doing this and the activities are
misbehaving? Measure should certainly have the ability to turn off one
channel it either shows the same data or no data when using the microphone.
On Kiwi, an XO-1.75: Froze this by swapping between the voltage and
microphone and fft modes repeatedly and quickly. See attached for
GDB backtrace and log.
I'd like the activity team to look at this one first.
Raised #3616
Hoiho does not boot if an android phone (with cyanogen mode and USB
Debugging turned on) is plugged in, holding down checkmark we see
the normal openfirmware banner and type the esc key to interrupt
message and the 2 - 1 and then the laptop freees. I?ve also seem
something similar with a USB Serial adaptor but haven?t explored
this.
This sounds interesting. Can you work with me on that during the
week? Will need to know firmware version you have on Hoiho.
Sorry, didn't get to this during the week. Hopefully this week will be
better. The version numbers are in the power logs (we put the laptop
names into the comment field). Hoiho had
ECVER: 0.4.03
OFWVER: CL2 Q4D13 Q4D
What would you like me to do next? I have a serial cable for the cpu
serial port.
Poppy Copy, an XO-1.5 B2 doesn?t boot -- it complains about read
only filesystems in the initramfs. We have reported this before, but
still haven?t looked at exactly what is going on.
The host name is set from the wireless card MAC address. Poppy Copy
had a dodgy wireless card connect, check to see if it has gone dodgy
again? The method of anchoring the wireless card was changed after
this point in development, so if it is caused by the mounting the
problem is slightly uninteresting.
Poppy Copy has working wifi on the olpc-au builds. It does have some
trouble with the wifi working over a suspend-resume. The error with os10
is
https://plus.google.com/photos/118146064923365210751/albums/5468706263336090945/5744058263743493474?banner=pwa
_______________________________________________
Testing mailing list
[email protected]
http://lists.laptop.org/listinfo/testing
