Scott,
Tnx for the reply. When I opened MixW to check the settings now everything was
working properly. Can't figure that out, but it is fine by me. I had shut
down the program and Pro3 earlier and then turned them on again to see if that
cleared up the problem. It didn't earlier, but seems to have now. Thanks for
your help. Greatly appreciate it. Happy New Year.
Scott Hill <[EMAIL PROTECTED]> wrote: It sounds
like you are getting RF into the computer...but I guess you
are not transmitting. Only other thing I could think of would be a
corrupted MixW program. You might try reinstalling.
Scott/K6IX
buzzmann555 wrote:
> I have just noticed that when I click on the screen to set my
> recieve/transmit flags to a certain frequency the flags do not move to
> where I have clicked on the frequency. They jump randomly about the
> spectrum/waterfall. If I click somewhere near the center of the
> screen the flags disappear off the right hand side of the screen. Too
> weird for me to figure out. Thanks in advance for the help.
Buzz
NI5DX
