I am sorry - I did not have enough time to fix it until now. It looks it is a bug in loch, not therion in this case. I will let you know when I will find out what is going on...
Thanks for feedbacks, S. Quoting Xavier Pennec <Xavier.Pennec at sophia.inria.fr>: > So far, this new version does not change anything to the bug in the > production of 3D files I signaled. Here it is again: left and right > width for leg 2-3 are correct in the Test3D.lox if the last line (leg > from station 2 to 4) is commented and are inverted if the line is not > commented. In both cases, the xvi produced is correct. > > Xavier > > Stacho Mudrak a écrit : > > >OK - so far I have found 2 bugs (both orientation and discontinuity), but I > am > >still not 100% sure, there are not some others. Could you please try new > >snapshot (sources + win32 installer are uploaded on the server) and report > any > >other problems? > > > >Thanks, S. > > > >Quoting "Cooper, Ben" <ben.cooper at siemens.com>: > > > > > >>Here is the raw data for NewPassage that reproduces the problem in the pdf > >>that isn't in the xvi. I've included a th2 file as a "viewer" for the XVI. > > >>Most of my survey legs are commented... > >> > >>Note that the BenPlan.pdf that Bruce produced also had a problem. > Although > >>each LRUD section was not flipped as here, the passage width from one LRUD > >>section to the next shows a discontinuity which is again different to the > >>xvi, and incorrect. See for example at stations Leg1.2 and Leg1.4. > >>Regards, > >>- Ben > >> > >> > > > >_______________________________________________ > >Therion mailing list > >Therion at speleo.sk > >http://www.speleo.sk/mailman/listinfo/therion > > > > > >