It seems it will work if I add station points with the .xvi layer activated as background image. Initally I disabled the layer because of the grid, which I found quite annoying, and I kept only the morphed images. It seems that in this way the program didn't recorded well the coordinates of the points. Otherwise, with the .xvi grid and centerline visible, if I add a station point it recognizes its name automatically, and the coordinates are a little bit different, with lot of decimals.
For the moment it compiles fine, in both .pdf and .shp format. Cheers, Mihai T. On Wed, Nov 23, 2011 at 11:06 AM, Mihai Terente <terenteml at gmail.com> wrote: > Yes, the same problem occurs when I add several station points. But > this happens only when I reeference the points to stations from the > survey (witn -name ...). I think it's something related to my approach > for morphing scanned images. I did like this: > - first I started an empty .th2 file (named schita-c1_w.th2, _w stands > for "warped") > - I added a background image (a piece of the scanned sketch, > CC01.jpeg), with Edit>Insert Image > - I created a scrap and I selected the scketch as a background image, > with the Insert button from the Scraps section in the control panel > - I added several station points, referenced to the station from a > survey, with -name ... at survey. From these stations it's only one that > is georeferenced (with fix command, in the survey preamble) > - then I compiled the map with -format .xvi > - Now, I noticed that if I add the .xvi file to my first .th2 file, I > get the image morphed, with the centerline on top of it, but displaced > with respect to my initial station points added to the scrap. > - That's why I a created a new .th2 file (schita_c1.th2), I added the > .xvi file as a background image and I drew the wall. If I compile the > map now (output esri .shp) everything goes fine, except that the .shp > is not georeferenced. If I add to the scrap the station point that is > georeferenced (fix) in the survey I get the error. > > I put everything into the archive attached, if you have time to take a > look, I would appreciate. > > Mihai T. > > > I put all my files in the .zip attached > > On Wed, Nov 23, 2011 at 10:42 AM, Xavier Pennec <Xavier.Pennec at inria.fr> > wrote: >> The problem could be that you have only one station point. >> Could you try to add a second one so that therion can scale the scrap >> consistently? >> >> Xavier >> >> Le 23/11/2011 07:19, Mihai Terente a écrit : >>> >>> Dear friends, >>> >>> I encountered the same problem and I was wondering if someone can >>> figure a solution. >>> I work with a morphed image on the background and the project compiles >>> well with the scraps containing only walls. But if I add to the scrap >>> a station point referenced to a survey (e.g. -name 2400 at survey) I get >>> the error. >>> Any suggestion? >>> >>> Mihai T. >>> >>> >>> >>> >>> Footleg drfootleg at gmail.com >>> Wed Mar 9 18:29:08 CET 2011 >>> >>> My files illustrating the problem are my entire project at this stage! >>> >>> There are 2 .th2 files in there. The smaller one is the single scrap which >>> works. The larger one is several scraps where only one is used in the map, >>> and causes the error. >>> >>> Attached in zip. It is not very large so sending to the list. >>> >>> Footleg >>> >>> On 9 March 2011 15:33, Martin Budaj<m.budaj at gmail.com>  wrote: >>> >>>> On Wed, Mar 9, 2011 at 3:58 PM, Footleg<drfootleg at gmail.com>  wrote: >>>>> >>>>> Yes, I put in three stations, which are named to match stations in a >>>> >>>> survex >>>>> >>>>> 3d file which is imported. >>>>> Exactly the same scrap in a th2 file on it's own works fine. But when >>>>> the >>>>> other scraps which I am not yet using in the map are in the th2 file it >>>>> fails with the errors given. >>>>> >>>>> I can email you the complete project files if you need them. >>>> >>>> Sure. Stripped files still producing this message would be better than >>>> the complete project. >>>> >>>> Martin >>>> _______________________________________________ >>>> Therion mailing list >>>> Therion at speleo.sk >>>> http://mailman.speleo.sk/mailman/listinfo/therion >>>> >>> _______________________________________________ >>> Therion mailing list >>> Therion at speleo.sk >>> http://mailman.speleo.sk/mailman/listinfo/therion >> >> -- >>> >>>  ------------------------- >>>  Xavier Pennec >>>  Senior Research Scientist / Directeur de recherche >>>  Asclepios project-team, INRIA Sophia-Antipolis >>>  2004 Route des Lucioles, BP93 >>>  F-06902 Sophia-Antipolis Cedex, France >>>  +33 4 92 38 76 64 >>>  +33 6 78 35 16 90 >>>  http://www-sop.inria.fr/asclepios/ >>>  ------------------------------- >> >> _______________________________________________ >> Therion mailing list >> Therion at speleo.sk >> http://mailman.speleo.sk/mailman/listinfo/therion >> >
