Hi Bruce, I am really sorry for late answer... As far as I know, if you change the extension options for a shot, there is no revision needed.
All you need to do is to change extend options after entire centerline is loaded. Instead of revise, you should use "centerline" command. In your case: centerline extend left 1.7 extend right 3.17 extend hide 3.21 #3.22 endcenterline If you do it from "upper" survey context, you may use -station-names <prefix> <suffix> centerline option. OK, I have not tried this :) But I believe, it should work. S. On 9 February 2014 08:55, Bruce <bruce at tomo.co.nz> wrote: > Michael and I have held off venturing into extended elevations for > many years, but it seems that now might be the time. Have been browsing > the last 7 years of forum posts on this, and so it is with some trepidation... > > > > We have a cave system that now has a variety of often travelled circuits > and through trips, and so we envisage having perhaps two or three or more > extended elevation projections (maps/scraps) as route guides. ie -proj > extended:1 -proj extended:2 -proj extended:3 etc. A number of the passages > will be included in more than one map, and the nature and location of the > 'extend xxx' statements in these common passages will likely be different > for each projection/map. At the very least, we do not want the existence > of an extended drawing for one survey prejudicing the creation of a > completely different extended drawing for the same survey (in keeping with > the Therion principle of do it once, use it many times). > > > > My long time (but untested) idea for this is to keep all the surveys with > the default 'extend right', and then at the time of compiling, include a > file full of revise statements to tweak he various surveys to extend left, > right, ignore etc to suit the particular extended drawing to be compiled. > > > > I have a simple one survey cave that I thought I would test this idea on, > and it seems already my idea is unravelling. > > > > I had hoped to use a revise block for each survey as below to insert the > required extend statements at compile time. Unfortunately I see that I can > amend the survey properties (in this case the title), but not the > stations/shots. > > > > revise hunters at HuntersCave -title "Hunters Cave - Revised title" > > #above single line works, but multiline as below causes error. unknown > command - extend > > > > extend left 1.7 > > extend right 3.17 > > extend hide 3.21 #3.22 > > endrevise > > > > Then I thought perhaps I could use one revise statement per station/shot; > > > > revise 1.7 at hunters.HuntersCave extend left > > > > but this brings up a therion error -- INDEXHunters.th [49] -- object does > not exist -- 1.7 at hunters.HuntersCave > > > > I can verify the station exists and is named as such, because it is > labelled that way in the pdf output and the aven 3d model > > > > So, is there a trick with the revise syntax for surveys or stations that I > have missed? Or am I trying to stretch it's capabilities too much? > > Or is there another way to manage multiple extended survey network shapes > for various extended drawing projections, rather than having the extended > survey shape fixed by the original survey definition? > > > > There are about 170 surveys in the real project and growing, so we would > rather not keep two sets of files or manually edit them each time! > > > > Bruce > > _______________________________________________ > Therion mailing list > Therion at speleo.sk > http://mailman.speleo.sk/mailman/listinfo/therion > > -------------- next part -------------- An HTML attachment was scrubbed... URL: <http://mailman.speleo.sk/pipermail/therion/attachments/20140220/82cb9240/attachment.html>