I had the same problem right from the beginning with 5.4.1 (I reverted
to 5.3.16). However I did not had time to investigate where it was
coming from, which is why I did not reported the problem. The
loop-closure-survex issue make sense qith the symptoms I had (ok for
small caves without cloops, crashing for my large project.
Xavier
Le 28-May-17 à 23:43, Bruce Mutton via Therion a écrit :
I’ve just started catching up on a drawing project since 5.4.1 has
been released.
A while back I reported problems with beta versions of Therion related
to ‘loop-closure survex’.
They were fixed in 5.4.0
Now using 5.4.1 those projects/thconfigs that crashed before now seem
to be OK, but I have now found another project/thconfig that crashes
with 5.4.1 but not with 5.4.0
5.4.1 runs OK with ‘loop-closure therion’ but gets killed by Windows
10 when I use ‘loop-closure survex’.
Am still using survex 1.2.27. I have attached the log file with
‘loop-closure survex’.
Not sure if it is related, but I notice that if I install 5.4.1
‘Install Only for Me’ it will not overwrite a previously installed
5.4.0, even though the installer does not report any errors or
problems to the user. Ie it fails even though it looks like it has
worked just fine.
To get 5.4.1 to overwrite 5.4.0 I need to “Install for all users”.
Bruce
_______________________________________________
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listinfo/therion
--
-------------------------
Xavier Pennec
Senior Research Scientist / Directeur de recherche
Asclepios project-team, INRIA Sophia-Antipolis
2004 Route des Lucioles, BP93
F-06902 Sophia-Antipolis Cedex, France
+33 4 92 38 76 64
+33 6 78 35 16 90
http://www-sop.inria.fr/asclepios/
-------------------------------
_______________________________________________
Therion mailing list
Therion@speleo.sk
https://mailman.speleo.sk/listinfo/therion
