May you send just screenshot of that problem you described? Martin
Odesláno z iPhonu 14. 4. 2020 v 8:50, Torsten Schnitter via Therion <therion@speleo.sk>: > Hi Roger > > I'm not sure about your problem with the "artifacts" but try > "symbol-hide point station" in your layout definition for the map. > (maybe also "symbol-hide line survey") > > Just a guess... > > cheers, > Torsten > >> Roger Schuster <ro...@r-schuster.de> hat am 13. April 2020 um 19:00 >> geschrieben: >> >> Hello again, >> >> finally I got it working and if I compare the output of Therion with the >> original map on paper there is only a tiny bit of distortion. Both maps >> match quite nicely. There are just two things I don't understand: >> >> There is a white, trapezoid gap on the map which isn't on the background >> image (of course). I guess it has something to do with the morphing - is >> there a way to get rid of this artifact? >> >> I also noticed that length and depth statistics in the map header (registers >> \cavelength and \cavedepth) are wrong while in the log file it's right. The >> values in the registers obviously depend on which stations / surveys are >> marked and to get the same values as in the log at least one station of each >> survey has to be marked (unfortunately each mark results in a more or less >> ugly white trapezoid as mentioned above). This is the reason why I decided >> to override the registers in code tex-map. >> >> Unfortunately I can't post the map here because of copyright reasons. >> >> Best regards, >> >> Roger >> >> ------ Originalnachricht ------ >> Von: "עמרי גסטר" < omri...@gmail.com> >> An: "List for Therion users" < therion@speleo.sk> >> Gesendet: 13.04.2020 14:06:17 >> Betreff: Re: [Therion] Sketches on doesn't work / legacy survey >> >>> You can use the debug function to see how bad is the distortion and change >>> the position of the station accordingly until you are happy with the >>> result. >>> >>> On Mon, Apr 13, 2020, 2:52 PM Roger Schuster < ro...@r-schuster.de> wrote: >>> Hello all, >>> >>> thank you for your answers. Projection none doesn't work - all survey lines >>> will appear on the pdf but not the scanned map. So I tried projection plan >>> again and marked a second station and this did the trick. The background is >>> now on the output as I expected. One problem I need to solve: The stations >>> aren't marked on the map so I've to guess where they are... My estimation >>> shouldn't be too far off to prevent unwanted distortions of the map. >>> >>> Thanks again for your support! >>> >>> Roger >>> >>> ------ Originalnachricht ------ >>> Von: "Martin Sluka via Therion" < therion@speleo.sk> >>> An: "List for Therion users" < therion@speleo.sk> >>> Cc: "Martin Sluka" < martinsl...@mac.com> >>> Gesendet: 13.04.2020 12:28:40 >>> Betreff: Re: [Therion] Sketches on doesn't work / legacy survey >>> >>>> >>>> >>>>> 13. 4. 2020 v 11:20, Roger Schuster < ro...@r-schuster.de>: >>>>> >>>>> After that I created a scrap with the scanned map (projection plan) and >>>>> scaled it using the scale bar and the scaling tool of Xtherion map >>>>> editor. >>>> >>>> I’m afraid it will work only for "projection none" as for sections. >>>> >>>> For plan you should use minimally two stations because Therion >>>> georeferences each scrap according those stations. >>>> >>>> Martin >>> _______________________________________________ >>> Therion mailing list >>> Therion@speleo.sk >>> https://mailman.speleo.sk/listinfo/therion > > > >> _______________________________________________ >> Therion mailing list >> Therion@speleo.sk >> https://mailman.speleo.sk/listinfo/therion > > > > _______________________________________________ > Therion mailing list > Therion@speleo.sk > https://mailman.speleo.sk/listinfo/therion
_______________________________________________ Therion mailing list Therion@speleo.sk https://mailman.speleo.sk/listinfo/therion