Bill Hawkins wrote:
Well, if you figure out how to introduce a 100 mS delay with a short length of cable, you should see a patent attorney.
Wait a minute. Aren't you using a homebrew divider to get 1 PPS from the 5061? That's a fine way to get long lasting offsets, but I can't imagine why it curved up or why the offset went away. My money's on the cordless phone or static electricity.
Bill
Nope, not using the external divider for this -- I'm going from the 5061A PPS output directly into the counter.
Re the cable and delay, I haven't fully thought this through, but wonder if perhaps there was a break in continuity (say, in the connector mating). With a 50 ohm termination at the counter, you'd have an RC network. The 5061A PPS output is fairly healthy (I think it's 10V peak) so the signal could still have enough amplitude to trigger the counter through the capacitance. Not sure if this is (or could be) the solution, but who knows...
John
_______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts