Hi Tom & Robert:
I think what this is saying is that if the control voltage to the OCXO
is fixed, then during the 10,000 (or more) seconds needed for GPS the
OCXO has drifted about 5E-11/day * 10,000/86400 = 6E-12 seconds which
exceeds what we are trying to accomplish.
BUT, if instead of using a fixed control voltage, a Ramp is used then
this will not happen. Now instead of using GPS to control a fixed
voltage it's used to control the slope of the ramp.
What am I missing?
Brooke
--
w/Java http://www.PRC68.com
w/o Java http://www.pacificsites.com/~brooke/PRC68COM.shtml
http://www.precisionclock.com
Tom Van Baak wrote:
. . . >>With a one-way code receiver, the best stability you can get out
of GPS is
about 10^(-8)/tau, corresponding to 10 ns jitter at 1 second. As such,
it takes about 10^(4) seconds for it to integrate down to the 1e-12 level, by
which time your OCXO has wandered above it. As such, it is tough to take
full advantage of a good OCXO by steering to GPS.
_______________________________________________
time-nuts mailing list
time-nuts@febo.com
https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
