Hi, TVB did provide a link to commented code, http://www.leapsecond.com/tools/PPSDIV.ASM
Regards, Robert G8RPI. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Arnold Tibus Sent: 25 February 2006 14:11 To: Tom Van Baak; Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Thought experiment on a low cost timing board >SNIP > > Also I think Brooks Shera keeps a copy of the code at: > http://www.rt66.com/~shera/index_fs.htm > Unfortunately there is only the hex list of the pic code. As I would like to experiment as well with this modification and try to change some parameters to fit my LPRO and some different OCXOs I own, is there a way to get the commented source code of it? >SNIP Arnold, DK2WT -- DSL-Aktion wegen großer Nachfrage bis 28.2.2006 verlängert: GMX DSL-Flatrate 1 Jahr kostenlos* http://www.gmx.net/de/go/dsl Any opinions expressed in this email are those of the individual and not necessarily Genetix Ltd (Genetix) or any company associated with it. This email and any files transmitted with it are confidential and solely for the use of the intended recipient. If you are not the intended recipient or the person responsible for delivering to the intended recipient, be advised that you have received this email in error and that any use is strictly prohibited. If you have received this email in error please notify Genetix by telephone on +44 (0)1425 624600. The unauthorised use, disclosure, copying or alteration of this message is strictly forbidden. This mail and any attachments have been scanned for viruses prior to leaving the Genetix network. Genetix will not be liable for direct, special, indirect or consequential damages as a result of any virus being passed on, or arising from alteration of the contents of this message by a third party. _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
