Brooke, don't know if this will be of any help as you're looking at your 4060 (and it may or may not be of any interest to the group as a whole) but I'm about 15 days into what I hope will be long-term monitoring of my two 5061As and one 5065A against GPS.
I'm using a setup that should be particularly good for intercomparison of the three standards, with a single counter and GPS source, and a GPIB-controlled coax switch that reads the 1pps from each source against GPS for 100 seconds (generating a single 100-reading average to the log file) before moving to the next source. I'm also plotting GPS signal strength and number of satellites seen, and the temperature both outside and inside (unfortunately, the temperature timestamp is currently in a different format than the other log files, and the temp sensor is located near the 5065A, with the 5061As at the other end of the basement -- I'm going to update all that when I return from my current business trip to India). Anyway, you can see the results at http://www.febo.com/time-freq/plots. The filenames are fairly self-explanatory; I recommend using the hourly averages rather than the 100 second ones (at some point I'll have enough data to reduce to daily averages). John _______________________________________________ time-nuts mailing list [email protected] https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
