One more thing... Some of the older 5045 modules had badly implemented hardware handshaking on the RS-232. Sometimes it helps to wire RTS to CTS in the connector of your RS232 cable which attaches to the cesium module. In any case, it never hurts.
-RL ------------------------------------------------------------ Robert Lutwak, Senior Scientist Symmetricom - Technology Realization Center 34 Tozer Rd. Beverly, MA 01915 (978) 232-1461 Voice [EMAIL PROTECTED] (Business) (978) 927-4099 FAX [EMAIL PROTECTED] (Personal) (339) 927-7896 Mobile ----- Original Message ----- From: "Magnus Danielson" <[EMAIL PROTECTED]> To: <time-nuts@febo.com>; <[EMAIL PROTECTED]> Sent: Saturday, March 18, 2006 1:11 AM Subject: Re: [time-nuts] Telecom Solutions DCD Cesium > From: "Robert Lutwak" <[EMAIL PROTECTED]> > Subject: Re: [time-nuts] Telecom Solutions DCD Cesium > Date: Fri, 17 Mar 2006 21:17:37 -0500 > Message-ID: <[EMAIL PROTECTED]> > >> Try downloading Monitor3 from the Symmetricom WWW site: >> http://www.symmetricom.com/support/knowledge_base/software_download.aspx?prodtype=TTM&file=Monitor_setup.zip > > Thanks! > > I have a DB9 on the Cesium, but it should be more or less the same thing. > > If someone has the protocol description I'd love a copy. > > Cheers, > Magnus > > _______________________________________________ > time-nuts mailing list > time-nuts@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts