Hi Folks, thanks for your extreme fast and precise answers! From these i follow that a 3325 showing this error is out of calibration concerning it's square wave output or the square wave output may be totally out of order at worst. That is everything i need to know!
Thank You Ulrich, DF6JB > -----Ursprüngliche Nachricht----- > Von: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] Im Auftrag von John Ackermann N8UR > Gesendet: Samstag, 18. März 2006 16:33 > An: Discussion of precise time and frequency measurement > Betreff: Re: [time-nuts] Self Test Error 2 on HP 3325 > > > My 3325A often shows an amplitude calibrate fail at poweron, > but if I wait a few seconds and then hit the cal button, it > passes. Not sure if that's the same thing as you're seeing or not. > > John > ---- > > Mike Feher said the following on 03/18/2006 10:20 AM: > > Ulrich - > > > > I do not know what you mean by "really means", but self > test #2 tests > > the amplitude calibration of the square wave output > according to the > > manual. Regards - Mike > > > > > > Mike B. Feher, N4FS > > 89 Arnold Blvd. > > Howell, NJ, 07731 > > 732-886-5960 > > > > > > > > -----Original Message----- > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > > On Behalf Of Ulrich > Bangert > > Sent: Saturday, March 18, 2006 10:12 AM > > To: Time nuts > > Subject: [time-nuts] Self Test Error 2 on HP 3325 > > > > Hi Folks, > > > > does anyone of you have a clue what a fail on self test #2 in a HP > > 3325 synthesizer really means? > > > _______________________________________________ > time-nuts mailing list > time-nuts@febo.com > https://www.febo.com/cgi-> bin/mailman/listinfo/time-nuts > _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts