Thanks David for the fast response. Your offer is very generous. I would like to accept it. I need the PS board A-7 and the right side with the front handle on it. I think the left side is the same as the right side. Let me know about the shipping charges and your address. I will send you the funds along with my address. thanks again David, Bruce W1GBS
----- Original Message ----- From: "David Forbes" <[EMAIL PROTECTED]> To: "Discussion of precise time and frequency measurement" <time-nuts@febo.com> Sent: Wednesday, May 24, 2006 3:44 PM Subject: Re: [time-nuts] HP-5245L Parts > Bruce Lanning wrote: > >> Thanks Allan for the response. I have the HP-5245L and the HP-5262A Time >> Interval Unit, but it is not working. Problems in the PS and the front >> handle on the right side is broken off. I had planned to use this unit >> for >> frequency comparison, but not sure this is what I want. Your comments >> would >> be appreciated. >> Bruce W1GBS > > Bruce, > > I have a 5245L parts unit with which I keep my main 5245L running. The > parts unit is an older blue one with a bad xtal oven. I already > borrowed a power supply pass transistor from it. I also borrowed one > of the counter/display boards. > > Let me know what parts you need for the PS and I'll send em over for > the price of shipping if I have them. The right side metal is > available too, but I don't know how hard it is to extract. It's > probably not too bad. I'll take a look at it. > > --David Forbes > Tucson AZ > > > > _______________________________________________ > time-nuts mailing list > time-nuts@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
