YOU have a 10811D that worn out? How did you determine this? -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Cornell Sent: Thursday, December 21, 2006 4:05 PM To: time-nuts@febo.com Subject: [time-nuts] Getting started on Shera project
I am new to the time list and a novice at disciplined oscillators. I will be starting the Shera disciplined oscillator project soon. I would love to hear from each and every one of you as I get started in this endeavor. I prefer to make a stand alone unit, rather than disciplining my HP5328A. There are some things that I already have that may help: * HP-5328A counter w/10811D (10811-60120) oscillator. Works good, but pretty old & worn. * Ovenaire 84-14 10 Mhz oscillator * Quintron Corporation Master Oscillator w/Ovenaire 74-14-1 5.0 Mhz oscillator installed. I think this is a disciplined oscillator but I do not know how to hook it up, or what to hook it up to. It puts out a 5.0 Mhz signal. * Good junk box and lots of tools and test equipment, and many years of experience as an electronic technician and ham operator. Things I am looking for * HP Z3801 or Z3816 * Data sheet or any other information for the Ovenaire oscillators, pinout, voltages, etc. * HP 10811 that is working * Any help or comments from the people on the list about what to do, what not to do, hints, kinks, etc. Thanks Max Cornell K0MC [EMAIL PROTECTED] _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts