Jason, Do me (and others) a favor and take some good pictures. Especially if you can get one with it all unfolded (like page 63) I'll fix/sitch it up in photoshop.
Jack -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jason Rabel Sent: Monday, January 22, 2007 5:16 PM To: 'Discussion of precise time and frequency measurement' Subject: [time-nuts] 10811 Repair (was warmup / bad batch) Okay, so I've partially disassembled my 10811, I have checked most of the points in the manual and everything appears okay. A couple questions though. There are a pair of black wires running from the top PCB down under the board below it (I haven't removed that board yet to see what is underneath), what are those wires for? I probed them and there doesn't appear to be any power? Second, the crystal has a red, green, and blue wire. I've probed all 3 of those and nothing. I would of expected one to be power, unless that is what the above mentioned black wires are for. About to call it a day. tomorrow I'll finish disassembling and see what all goes where. Jason _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts