I had the exact same problem as yours. I discoverd that my 106B had a 6-channel board in it vs. the 8-channel that is supposed to be in there. I put a 8-channel board in and the fault and GPS lights went out.
----- Original Message ----- From: "Robert E. Martinson" <[EMAIL PROTECTED]> To: "'Discussion of precise time and frequency measurement'" <time-nuts@febo.com> Sent: Tuesday, February 06, 2007 11:27 Subject: Re: [time-nuts] Lucent RFTG-m-XO > Over the weekend I left the XO unit running for 38 hours, with it > installed > in its "house" (No probing). The GPS receiver was tracking satellites at > the start and also at the end of the run as verified by monitoring J5-2 > w/VisualGPS. The Fault & No GPS LEDs never went out. I'm about to > conclude > that I have a defective unit and will order another unless anyone has any > further suggestions (PLEASE)? > > > I see at least John A., Jim M., & Phil S. have working XO units. I have > just reviewed all the emails on the RFTG units and believe I have tried > all > the previous suggestions. Any additional secrets to share??? > > > Bob Martinson, N1VQR > > > > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On > Behalf Of Phil Staton > Sent: Thursday, February 01, 2007 6:53 PM > To: time-nuts@febo.com > Subject: [time-nuts] Lucent RFTG-m-XO > > > Briefly: > Leave it running for at least 24hrs. > The 15MHz will slowly get on freq. > Countup is available on 1pps socket. > more when I have time > > _______________________________________________ > time-nuts mailing list > time-nuts@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > _______________________________________________ > time-nuts mailing list > time-nuts@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts