I have the controller board from a 5328A Counter that had a 10811A on it. That oscillator now resides in an HP 5350A counter.
I have a 10544A oscillator and just want to checl it out using the controller board. I tried the Agilent Manual site but nothing there. 73, Dick, W1KSZ -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Jason Rabel Sent: Saturday, February 10, 2007 10:02 PM To: 'Discussion of precise time and frequency measurement' Subject: Re: [time-nuts] 10544A Oscillator Question I believe you can find the 10544A info on the HP Archive website. >From what I have read you can use a 10811A (newer model) to replace a 10544A (older model) as it is backwards compatible. However the reverse is not always true. What piece of equipment are you trying to plug it into? I'm sure some of the guys here would be able to tell you if it is okay to or not. Jason > Is the 10544A interchangeable with the 10811A ? > If I plug the 10544A into the controller board which > previously held a 10811A will I fry anything ? > > Anyone have a manual for the 10544A ? > > Thanks, > > 73, Dick, W1KSZ _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts