Tell me more about NTP and GPSD? I seem to remember downloding something that was suppose to translate Trimbles messages to standard NEMA data but gave up trying to make it work. -----Original Message----- From: [EMAIL PROTECTED] To: time-nuts@febo.com Sent: Tue, 13 Feb 2007 9:58 AM Subject: Re: [time-nuts] Thunderbolt GPSDO
> Mine used a +12, two +5 and a -7 VDC. I know the manual says the > thunder bolt requires a -12 but mine had a -7 on it Is the -12 used for anything other than driving the RS-232 signals? I expect that would work with almost anything. > The data out is Trimble propriety and you have to use their software. > It's free off their website and I downloaded 2. ntp has a refclock module that talks to some Trimble units. Looks like gpsd has Trimble support too. I don't know if they talk to this particular model, but there is at least some readily available code to look at if anybody wants to write their own. -- These are my opinions, not necessarily my employer's. I hate spam. _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts ________________________________________________________________________ Check out the new AOL. Most comprehensive set of free safety and security tools, free access to millions of high-quality videos from across the web, free AOL Mail and more. _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts