Thanks, Had! By the way, I'm doing a stability measurement of my 1210D right now, and it isn't bad at all -- it's in the 13s from tau 0.4 seconds out to a little beyond 1000 seconds. It bottoms out at 4.5x10e-13 at 100 seconds (and for all I know right now, that floor may be that of the reference oscillator, an FTS-1050A). Phase noise is better than -105dBc/Hz at 1 Hz offset.
Not a bad oscillator! John ---- Had said the following on 03/08/2007 07:20 PM: > > Hey gang, > > For all you Austron Crystal Clock "nuts" out there that downloaded > the manual that Rob provided (Thank You) I have scanned all 37 fold > out drawings as full size, 11x17 (B size), scanned at 300dpi, > monochrome images, using Acrobat Pro 7.05. They print out pretty > nicely for me on a Minolta laser. > > They can be found at www.to-way.com > > > > > > > A well regulated Militia, being necessary to the security of a free > State, the right of the people to keep and bear Arms, shall not be > infringed. > > > > > This message (including any attachments) contains confidential > information intended for a specific individual and purpose, and is > protected by law. If you are not the intended recipient, you should > delete this message. Any disclosure, copying, or distribution of this > message, or the taking of any action based on it, is strictly prohibited. > > > _______________________________________________ > time-nuts mailing list > time-nuts@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > > _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts