Sometime in the past few years someone posted a sample trace of RS232 commands (the Motorola binary @@ set) that the Z3801A CPU sends to/from the GPS receiver.
It seems to me that if you wrote a emulator/translator you'd be able to substitute just about any GPS receiver for the original Oncore VP. This would be a cute microcontroller project. /tvb ----- Original Message ----- From: "Didier Juges" <[EMAIL PROTECTED]> To: "!Time Nuts" <time-nuts@febo.com> Sent: Friday, May 18, 2007 11:51 AM Subject: [time-nuts] Z3801A with other GPS receiver > Here are a few questions about reusing a Z3801A main board. > > Would the Z3801A work with another GPS receiver? > In other words, does the board talk to the GPS engine via the serial > port, other than receiving the 1 PPS? > > If it does talk to the GPS receiver, which GPS receiver other than the > original 6 channel Oncore model would work with it (compatible command > structure)? > > Thanks in advance > > Didier KO4BB > > > _______________________________________________ > time-nuts mailing list > time-nuts@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts