Pretty similar results here, taken from the 5370B's rear-panel output while running on the internal 10811B (attached). Indicated jitter with this setup is about the same as it was on the ext ref via the 5087A (10-12 ps).
I've seen this counter return self-test jitter results in the 15-25 ps range before. Not sure why it's in such a good mood today. At any rate, it doesn't appear that the wave shape is a problem... but of course, you will usually get better jitter readings with a fast edge than with a sine wave. -- john, KE5FX > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > Behalf Of [EMAIL PROTECTED] > Sent: Saturday, June 09, 2007 4:44 PM > To: time-nuts@febo.com > Subject: Re: [time-nuts] another Ebay mixup, 5370 > > > > In a message dated 6/9/2007 14:56:04 Pacific Daylight Time, > [EMAIL PROTECTED] writes: > > >Can you send an image of the rear panel sinewave output waveform? > > >Bruce >
<<attachment: 5370fd.gif>>
<<attachment: 5370td.gif>>
_______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts
