Hi Said, Before fixing the bad cap, the waveform was totally different (essentially a 30 MHz signal), after fixing it, the waveform looked closer to yours. I have attached a link to a picture showing the HP8657B at the top as a reference, and the current state (after fixing the cap) 10 MHz output from the HP5370A at the bottom (using a Tek 2245A 100 MHz scope). The top waveform is a little blurry because the two time bases are not phase locked, and I triggered on the HP5370.
http://www.ko4bb.com/Test_Equipment/HP_5370A/HP8657B-HP5370A.png I also have a spectrum plot of the HP5370A ref output. http://www.ko4bb.com/Test_Equipment/HP_5370A/HP5370A.jpg Didier [EMAIL PROTECTED] wrote: > > In a message dated 6/9/2007 18:32:04 Pacific Daylight Time, [EMAIL PROTECTED] > > writes: > > > >> You sent pictures of the Fury's waveform, only the spectrum of the 5370. >> > > >> Didier >> > > > > Hi Didier, > > here is a re-send of the 5370B waveform, and the Fury spectrum. Not sure why > you didn't get them before. I sent them in separate emails because of the > size limit on Febo. > > You can see the distortion in the zoomed sine wave pic. > > bye, > Said > > > > ************************************** See what's free at http://www.aol.com. > > ------------------------------------------------------------------------ > > _______________________________________________ > time-nuts mailing list > time-nuts@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts