Good catch! I didn't realize Microsoft removed HyperTerminal from Vista. You could use TeraTerm Pro instead - http://hp.vector.co.jp/authors/VA002416/teraterm.html
Configure as follows: Open "Setup" | "Terminal" dialog, check "Local Echo" and set Transmit to "CR+LF" Then open "Setup" | "Serial Port" and pick the port you want to use. Rest of the update instructions remain the same. By default, TeraTerm Pro shows only COM1-4. If your USB serial port is higher than COM4, edit TERATERM.INI and set MaxComPort to a higher value. For example: MaxComPort=16 Regards, Abdul -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Edwin B. Walker Sent: Sunday, June 10, 2007 11:52 AM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Prologix GPIB-USB Controller firmware update -version4.60 Abdul, will this controller work with Windows Vista as I don't find a copy of hyperlink in there? Ed -----> version! > > > > Rest of the website will be updated soon to better document the new, and > old, commands (I know, I know, been saying that for a while!). Meanwhile > feel free to email [EMAIL PROTECTED] with any questions. > > > > Regards, > > Abdul > > > > > > _______________________________________________ > time-nuts mailing list > time-nuts@febo.com > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts _______________________________________________ time-nuts mailing list time-nuts@febo.com https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts