); SAEximRunCond expanded to false Errors-To: [EMAIL PROTECTED] In a message dated 10/07/2007 17:36:08 GMT Daylight Time, [EMAIL PROTECTED] writes:
The UPS man just delivered a care package from my latest ebay purchase!!! I fired it up and found the front panel displayed properly, but no output on the 75ohm BNC connector, but the rear panel 21-60mhz aux works fine as mesured by a 5328a counter. Pulled the bottom off and note that the 50 ohm output into the matching box has good signal - problem in the 50/75/150/600 assembly. ------------------------------------ This question prompted me to take a look at the pdf service manual I have for the 3336, thinking it should be a relatively easy fix, but I find my copy doesn't contain any schematics. I've got a couple of these units that I haven't checked out yet so would be grateful if anybody has a pdf service manual that includes schematics, or just the schematics, that they'd be willing to share? I've tried the Agilent site and a Google search but no luck with either. regards Nigel GM8PZR _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.