); SAEximRunCond expanded to false Errors-To: [EMAIL PROTECTED] RETRY In a message dated 8/20/2007 12:47:02 Pacific Daylight Time, [EMAIL PROTECTED] writes:
>I could be wrong, but diurnal perturbations sound like antenna, >location, or placement more than receiver. 12h or 24h period? Hi Tom, hard to say. I run all my units from the same antenna/feed using an HP 1-to-8 splitter, so I don't think it's the antenna. It may be the Auto-Survey thoug h, since I don't hard-code the position but rather let the receivers determine it themselves. Maybe the M12M's have better Auto Survey precision? I have tested three different M12M's on different Fury's, and all are better than the M12+'s. What we noticed is a fairly significant reduction in long-term (say >5 hours) EFC voltage activity with the new receivers, which seemed to be related to thermal changes, which are diurnal of course, 24 hour periods. I expect the reason for the lower EFC voltage activity to be a better accuracy of the 1PPS signal since the OCXO's are extremely good (6.6E-012 change per degree C for the OCXO itself) and we also electronically measure and compensate for the residual thermal coefficient of the electronics on the Fury GPSDO. With this electronic compensation we expect less than 2E-012/Deg C thermal sensitivity of the unit (excluding the GPS receiver itself). The new receivers also have less hold-over, and generally a much reduced Standard Deviation error as indicated by GPSCon. My theory is that the older M12+'s were just quite sensitive to thermal changes, which show up as diurnal errors. Randy also confirmed that the old M12+'s had a significant thermal sensitivity in their TCXO's. The M12M's are much improved. To test this using my Cs or Rb's is difficult, since my Cs is somewhat thermally sensitive, and the Rb is running of GPS as well (sigh). Wish I had a maser, or 5071A etc. bye, Said ************************************** Get a sneak peek of the all-new AOL at http://discover.aol.com/memed/aolcom30tour _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.