); SAEximRunCond expanded to false Errors-To: [EMAIL PROTECTED] RETRY Dear All,
After some shipping time, my E1938 arrived today! :-) :-) :-) Thank you Rick! First thing was examining the board, oscillator and the HP-test notes/labels. Most of the specs mentioned there are logical and numbers are very reasonable. ;-) However, one spec drew my attention: "Hz off freq. after warm up: -2,94". Does anyone know what it means? Is this the offset after warm-up without EFC applied? The unit hasn't been powered up. Whit the hardware at hand I first want to read some docs to be sure about what I'm doing. For comparison, what other numbers are around for the "Hz off freq. after warm up"-spec? Final result of the HP-test was: PASS. So, I assume this number is OK. What is your opinion? Looking forward to your reactions. 73 Jeroen PE1RGE -- Ing. Jeroen Bastemeijer Delft University of Technology Department of Electrical Engineering Electronic Instrumentation Laboratory Mekelweg 4, Room 13.090 2628 CD Delft The Netherlands Phone: +31.15.27.86542 Fax: +31.15.27.85755 E-mail: [EMAIL PROTECTED] GPS: Lat N52.00002 Lon E4.37157 Alt 46.2m _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.