); SAEximRunCond expanded to false Errors-To: [EMAIL PROTECTED] RETRY This one was free and there's much satisfaction in making the old stuff work once more. When I get it set up it will likely be used to output cad plots for EDA work including PCB artwork, and schematics. It may be slower than the current inkjets but it fits the budget and I do it because I can.
Eric On 10/21/07, Joseph Gray <[EMAIL PROTECTED]> wrote: > > Speaking of plotters, I know there are still some things that you need a > plotter for, but the inkjets are faster, higher resolution and much > _quieter_. A while back, I picked up a used HP 1220C for cheap. It does > B-size. I don't use it much, but I keep it around for when I do need it. > > BTW, just in case anyone has or is looking for an HP 1220C, there was a > very > common failure in the power supply with this model. That's why I got mine > so > cheap. If it doesn't power up at all, look for a burned-up resister. The > fix > is a new resistor, with a higher wattage rating. If you Google, you'll > find > this documented somewhere. That's how I originally found out about it. > > > _______________________________________________ > time-nuts mailing list -- time-nuts@febo.com > To unsubscribe, go to > https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts > and follow the instructions there. > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.