I am aware of at least 2 more 3478 at my workplace, one of them actually has been in my office for so long I forgot about it. It has worked fine with the older Prologix controller (the one without a case,) with nothing else on the bus now that I think of it :-) Different firmware but same Atmel chip I believe. I used the 3478/Prologix as a temperature data logger with a thermistor for a while. I liked the 3478 so much I bought one for myself on eBay, that's how I ended up with one :-)
On this subject, I recently wrote a short Visual basic program to help me with temperature calculations from thermistors. It is at http://www.ko4bb.com/Thermistor Get your free copy while they last :-) Didier KO4BB > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Daun Yeagley > Sent: Wednesday, November 28, 2007 7:45 PM > To: 'Discussion of precise time and frequency measurement' > Subject: Re: [time-nuts] OT: Prologix GPIB and HP3478A...The Answer! > > Well, I have a 3478A, but unfortunately not a Prologix. If I > get my hands on one I could add a data point. > Personally, I think there is a fault in that particular > 3478's driver chips. > > Daun _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.