John - Maybe I am not totally awake yet or have too many other things on my mind, but, I do not understand your plots. I assume the measurements were made with one Z3801A being the DUT and the other the reference, and, both locked to GPS at the time. While it is probably available someplace, maybe on your page or on TVB's, I would really like to see the comparison of a locked Z3801A to an unlocked one with the same set of information that you provided. Also maybe the plots could be superimposed for easier comparison. I would recommend that you use the better of the two Z3801As in an unlocked condition as reference should you decide to go through with the exercise. Thanks & 73 - Mike
Mike B. Feher, N4FS 89 Arnold Blvd. Howell, NJ, 07731 732-886-5960 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of John Ackermann N8UR Sent: Friday, January 25, 2008 9:06 AM To: Discussion of precise time and frequency measurement Subject: Re: [time-nuts] Z3801A performance plots Sorry, I mistyped. Try this: http://www.febo.com/pages/oscillators/z3801a/ John ---- Mike Feher said the following on 01/25/2008 08:41 AM: > John - > > Your link did not work for me. Thanks - Mike > > > > Mike B. Feher, N4FS > 89 Arnold Blvd. > Howell, NJ, 07731 > 732-886-5960 > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there. _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.