DR, Thanks. I already found that pull down menu but can't find an explanation of the multiple buttons. It looks like you wait until the survey completes then simply copy the lat/long, etc info from the main screen to the corresponding fields in the pull down then press "set accurate". I just want to understand all of the options.
Ken, WA2LBI On Feb 6, 2008 5:16 PM, Dan Rae <[EMAIL PROTECTED]> wrote: > Ken Winterling wrote: > > >Greetings, > > > >I am new to using a GPSDO and have recently obtained a Trimble > >Thunderbolt. It is up and running and I am using TBOLTMON to monitor > >its operation. Everything is "green" except the "stored position" > >minor alarm. > > > > > > You'll need that Ken if you ever turn it off, otherwise it will start > another survey. > > It's in one of the pull down menus. > Setup / Position / Set accurate position would be the best guess. > I think it took me a couple of tries to find it, but you'll see it go > green when you get it right. From then on it will stay in eeprom, if > you do turn it off. > > The manual is not a lot of help, it just says the program is highly > intuitive! I guess it is :^) > > dr > > > _______________________________________________ time-nuts mailing list -- time-nuts@febo.com To unsubscribe, go to https://www.febo.com/cgi-bin/mailman/listinfo/time-nuts and follow the instructions there.